نتایج جستجو برای: cr 3and ni 2

تعداد نتایج: 2591818  

Journal: :journal of dental biomaterials 0
zohreh borhan haghighi department of prosthodontics , school of dentistry, zahedan university of medical sciences, zahedan, iran ali mohamad pahlavanpour fard jahromy school of dentistry, zahedan university of medical sciences, zahedan, iran

statement of problem: endodontically treated teeth are more prone to fracture. the post and core are often used to provide the necessary retention for prosthetic rehabilitation. objectives: the purpose of this study was to: 1) compare the fracture strength of endodontically treated teeth restored either with nickel-chromium (ni- cr) post or non- precious gold-color alloy (npg) post compared to ...

Journal: :European cells & materials 2005
D Mareci Gh Nemtoi N Aelenei C Bocanu

Five non-precious Ni-Co based alloys were analyzed with respect to their corrosion behaviour. The correlation between the amount of the elements Cr, Mo, V and the corrosion behaviour, expressed by the PREN (pitting resistance equivalent number) index in the case of the allied steels, was extended for Ni-Cr and Co-Cr dental alloys characterization. Open circuit potential, corrosion current densi...

Transient liquid phase (TLP) bonding of AISI 304L stainless steel was carried out using BNi-2 amorphous interlayer. The microstructure of the joint area was studied by using optical and scanning electron microscopes and energy dispersive spectroscopy. The effect of bonding temperature (1030-1110 °C) was studied on the microstructure and corrosion behavior of the TLP bonded samples. Electrochemi...

Journal: :Science and technology Indonesia 2022

Cellulose-based Ni/Cr (Ni/Cr-C) and cellulose-based Zn/Cr (Zn/Cr-C) composite materials have been successfully carried out, which is indicated by the XRD, FTIR, BET analysis. Layered double hydroxide (Ni/Cr-LDH) increased surface area from 0.128 m2/g to 2.207 in Ni/Cr-C composites, layered (Zn/Cr-LDH) also 0.133 3.714 Zn/Cr-C composites. The pHpzc of material this study pH 5.94-8.43, while opti...

2003
Heeman Choe David C. Dunand

The steady-state creep rate of Ni-base metallic foams, with superalloy composition (in wt. pct) Ni7.8∼9.1Al (relative density, ρ = 2.5-2.6) and Ni-13.5∼16.6Cr-5.1∼8.9Al (ρ = 2.8∼3.0), was measured under a range of temperatures (680∼825°C) and applied stresses (0.1∼0.3 MPa), and compared with that of NiAl intermetallic foams (ρ = 5.3). The stress exponent and activation energy are within the exp...

Davood Bahri, Najmeh Najmoddin, Sara Koosha, Sayed Khatiboleslam Sadrnezhaad,

Background and Aim: High chipping rates of the veneering porcelain in zirconia ce-ramic restorations have been reported in many clinical studies. However, information on the bonding behavior of veneering porcelain to zirconia and lithium disilicate frameworks is limited. The purpose of this study was to evaluate the bond-ing strength of porcelain veneering to zirconia, lithium disilicate, nicke...

Journal: :Journal of biomedical materials research 1997
Z L Sun J C Wataha C T Hanks

The objective of this study was to evaluate the effects of metal ions, which may be released from orthopedic or dental implants, on osteoblast metabolism and differentiation. ROS 17/2.8 cells were cultured in F-12 medium for 7 days. Then Al+3, Co+2, Cr+3, Ni+2, Ti+4, and V+3 were added at concentrations less than their cytotoxic concentrations. After 3 days, DNA synthesis, succinate dehydrogena...

2010
Shi Wang Wenrui He Xuehua Ding Wei Huang

In the title compound, [Cr(2)Ni(C(16)H(14)N(2)O(2))(2)(CN)(4)(C(10)H(24)N(4))]·2CH(3)OH, each [Cr(salen)(CN)(2)] unit {salen is 2,2'-[ethane-1,2-diylbis(nitrilo-methyl-idyne)]diphenolate} acts as a monodentate ligand through one of its two cyanide groups N bound to a central [Ni(cyclam)](2+) core (cyclam is 1,4,8,11-tetra-azacyclo-tetra-deca-ne). Each Cr(III) ion is coordinated by two N and two...

Transient liquid phase (TLP) bonding of AISI 304L stainless steel was carried out using BNi-2 amorphous interlayer. The microstructure of the joint area was studied by using optical and scanning electron microscopes and energy dispersive spectroscopy. The effect of bonding temperature (1030-1110 °C) was studied on the microstructure and corrosion behavior of the TLP bonded samples. Electrochemi...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید