Tensile creep of concrete at early ages is one of the important factors that affect the stress of restrained and partly restrained concrete. But only few data are available on tensile creep of concrete. The effect of ground slag on tensile creep was studied using lever-type tensile creep tester. Early age tensile basic creep of concrete loaded at the age of 3 days was researched. Results show t...

The compressive creep and recovery of foam earplugs was studied at various applied stresses leading to different fi nal creep strains. Deformation was determined from digital videos of the earplugs via image processing software. Creep could not be modeled by a single exponential in time; creep approximated a power law in time. Nonlinear viscoelasticity was observed: creep compliance depends on ...

All three burning plasma experiments discussed at Snowmass during the summer of 2002, use preloaded structures to resist some component of the operating loads. For the resistive pulsed reactors, it is the preloads which introduce the most noticeable creep responses because these loads are applied for much longer than the operating loads. If the preloads are maintained during shut-down and maint...

In order to characterize the creep behaviors of 2219 aluminum alloy at different temperatures and stress levels, a RWS-50 Electronic Creep Testing Machine (Zhuhai SUST Electrical Equipment Company, Zhuhai, China) was used for creep experiment at temperatures of 353~458 k and experimental stresses of 130~170 MPa. It was discovered that this alloy displayed classical creep curve characteristics i...

The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...

Abstract: The creep performance of plastics is one of the main criteria for a variety of applications with strict dimensional stability needs, including electrical/electronic parts and various automotive applications. However obtaining or generating accurate creep data is very difficult for both resin suppliers and product designers because the creep property is time dependent, which means it t...

The objective of these experiments was to test the hypothesis that the "creep currents" induced by Na loading of single frog atrial cells (Hume, J. R., and A. Uehara. 1986. Journal of General Physiology. 87:833) may be generated by an electrogenic Na/Ca exchanger. Creep currents induced by Na loading were examined over a wide range of membrane potentials. During depolarizing voltage-clamp pulse...

This study has investigated the creep properties of asphaltic concrete modified with different dosages of waste polyethylene terephthalate (PET) in two different ranges of size. Uniaxial dynamic creep test at 40°C was conducted on the cylindrical specimens of the mixtures. The load was applied in two different frequencies of 0.5 and 5Hz. Creep test results showed that the accumulated strain und...

In this study, the non-linear creep behaviour of a thick-walled cylinder made of stainless steel 316 is investigated using a semi-analytical method. The thick-walled cylinder is under a uniform internal pressure and a non-axisymmetric thermal field as a function of the radial and circumferential coordinates. For the high temperature and stress levels, creep phenomena play a major role in stress...

Assessment of creep damage and residual creep life of a cast HP 40 Nb Mod. Reformer tube was performed, wherein the experimental Larson–Miller diagram and area fraction of creep voids were adopted. The state of damage of the tube in service was metallographically analyzed by using light and electron microscopy. Samples from the serviced reformer furnace tube were cut and prepared for void exami...