نتایج جستجو برای: critical rotational speed
تعداد نتایج: 702892 فیلتر نتایج به سال:
in this paper, the effects of transverse cracks on rotating shaft were studied. according to earlier works, crack shaft failure decrease the critical speed of the shaft and also exhibit a nonlinear vibration behaviour leading to increases the amplitude of 1x and 2x harmonics (first and second order of rotational speed in torsional vibration). this suggests that the application of order analysis...
In this paper, the experimental investigation of formability of friction stir welded ultra-thin sheets of IF steel is investigated experimentally. First, the sheets are joined by friction stir welding process based on the tests determined according to the Taguchi design of experiments. The investigated parameters in the welding process are as tool rotational and traverse speeds. Then, the tailo...
Friction stir welding is a relatively new solid state joining process, which is suitable for welding similar and dissimilar materials. The present research work concentrates on the effect of tool rotational speed on the tensile, microstructural properties and microhardness of the friction stir welded joints of different grades of austenitic stainless steel sheets. Four different tool rotationa...
In this paper, the experimental investigation of formability of friction stir welded ultra-thin sheets of IF steel is investigated experimentally. First, the sheets are joined by friction stir welding process based on the tests determined according to the Taguchi design of experiments. The investigated parameters in the welding process are as tool rotational and traverse speeds. Then, the tailo...
This study focused on the optimization of Al—Mg to CuZn34 friction stir lap welding (FSLW) process for optimal combination of rotational and traverse speeds in order to yield favorable fracture load using Grey relational analysis (GRA). First, the degree of freedom was calculated for the system. Then, the experiments based on the target values and number of considered levels, corresponding orth...
The noise and vibration of a ring-plate pincycloid gear reducer driven by two motors are measured respectively at different rotational speeds and different loads. The data are collected and analyzed using the HEAD acoustics multi-channel noise test and analysis system. The ArtemiS is a set of analysis system for improving product quality in all areas of sound and vibration. From the frequency s...
comparison of coefficient of variation with non-uniformity coefficient in evaluation of grain drills
external fluted feed rolls are commonly used in grain drills. the fluted feed roll meters a volume of seeds and does not singulate the seeds as do the precision planters; therefore, there will be inherent variation in the number of seeds delivered per unit of time. this research was conducted to investigate the effect of seed meter drive shaft and ground speeds and outlet positions in a grain d...
in this study canthaxanthin was produced by dietzia natronolimnaea hs1 and used for incorporation in niosomes after extraction. effect of rotational speed of rotary vacuum evaporator flask (100 and 150 rpm), canthaxanthin concentration (0, 1 and 2 microgram/ milliliter), concentration of poly ethylene glycol 400 (0, 0.1 and 0.2 %), surfactant type (tween 60 and 80, span 60 and 80) and surfactan...
In this study, we characterized the rotational efficiency of the photo-driven Archimedes screw. The micron-sized Archimedes screws were fabricated using the two-photon polymerization technique. Free-floating screws trapped by optical tweezers align in the laser irradiation direction and rotate spontaneously. The influences of the screw pitch and the number of screw blades have been investigated...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید