Powder metallurgic giant magnetostrictive composite materials (GMM) which are special kind of metallic compounds have a wide range of application possibilities. These materials have a homogeneous structure, low internal stresses and low cost, which make them able to create magnetostrictive elements. Therefore, GMM can be used to develop positioning as well as vibration actuators with quick resp...

The development of sustainable and low cost electrode materials for sodium-ion batteries has attracted considerable attention. In this work, a carbon composite material decorated with in situ generated ZnS nanoparticles has been prepared via a simple pyrolysis of the rubber powder from dumped tires. Upon being used as an anode material for sodium-ion batteries, the carbon composite shows a high...

friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized al2o3 and micro sized graphite particles. a mixture of al2o3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. packed groove was subjected to friction stir processing in order to im...

In previous study, dense and homogenous 20wt% HAP/Ti composite coatings were successfully deposited on Ti substrates by cold gas dynamic spray technique. The results revealed that the phase composition of the HAP in the deposit is identical to that of the precursor powder and the bonding strength of the deposit is comparable/better to that of the plasma sprayed HAP. A relatively higher corrosio...

A study was carried out to characterize Ni-Co-PVC and Ni-Cu-PVC composite materials prepared by mechanical alloying technique (MAT) using SEM, EDS and electrochemical test. Composite materials were prepared by mixing together 95% of metal powder (Ni+Co or Ni+Cu) with 5% PVC. PVC was used as a binder and tetrahydrofuran (THF) was used as a solvent in composite material preparation. Based on the ...

Silica exists in Rice husk, an agriculture waste, as a naturally occurring phase. In first step, acidic pre-treatment and calcination of the rice husk were performed to obtain nano-silica, in which various sizes of the nano-silica, totally with sizes under 80 nm, were achieved. Second, to reduce nano-silica to elemental Si and subsequently formation of the composite, Mg used as the reducing age...

The corrosion resistant coatings used conventionally are susceptible to degradation, leading to pitting corrosion. This report summarizes the corrosion resistant nature of thin films of Cu-TiO2 coated on mild steel, in different corrosion environments. Nano meter thick (100nm, 125nm, 150nm) composite coatings were coated on steel substrate by RF magnetron sputtering technique. The required targ...

In this study, the elemental powders of aluminum and copper were initially subjected to mechanical alloying using an attrition ball mill under argon atmosphere to produce an Al-4.5 wt% Cu powder alloy. The WC nanoparticles were then added to the powder alloy and milled in a planetary ball mill to explore the role of the WC nanoparticles on the mechanical properties of the fabricated composite p...

OBJECTIVES This study evaluated the antibacterial effect and mechanical properties of composite resins (LCR, MCR, HCR) incorporating chitosan with three different molecular weights (L, Low; M, Medium; H, High). MATERIALS AND METHODS Streptococcus (S). mutans 100 mL and each chitosan powder were inoculated in sterilized 10 mL Brain-Heart Infusion (BHI) solution, and was centrifuged for 12 hr. ...

In this study, Al/Gr composites with 5,10,15,20 weight percent of graphite were produced by in-situ powder metallurgy method. The produced powder mixtures were consolidated and sintered at optimum conditions. The resultant composites were solution treated at 495?C and aged at 170?C. The influence of graphite content on the bending strength of composites was studied. The distribution of graphite...