The most emerging needs of the modern metal cutting operation are to increase the material removal rate with better surface finish and high machining accuracy. These objectives can be achieved by reducing cutting temperature in the cutting zone. In metal cutting process, high cutting temperature and its detrimental effects are generally reduced by proper selection of process parameters, proper ...

In this study, an experimental approach is presented for the measurement of the surface roughness of the machined surface produced by simple turning operation in a computer numerically controlled (CNC) Lathe. The parameters used in the experiment were reduced to three cutting parameters, cutting speed, depth of cut, feed rate. Other parameters such as tool nose radius, workpiece length, workpie...

Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...

Abstract—Water miscible cutting fluids are conventionally used to lubricate and cool the machining zone. But issues related to health hazards, maintenance and disposal costs have limited their usage, leading to application of Minimum Quantity Lubrication (MQL). To increase the effectiveness of MQL, nanocutting fluids are proposed. In the present work, water miscible nanographite cutting fluids ...

In this research work a series of tests were conducted in order to determine flank wear and cutting force FY on hard AISI 440 C martensitic stainless steel and SCM 440 alloy steels. The operating parameters are cutting speed, feed rate and a constant depth of cut to investigate the flank wear and cutting force. No cutting fluid was used during the turning process. The cutting tool used was CBN ...

this is an observational case series study on penetrating trauma admissions in three teaching hospitals in tehran from 1996 to 1997. in order to describe the epidemiology and determine the ways of improving treatment of penetrating injuries, we selected 410 patients with penetrating injuries and injury severity scores (iss) of more than 7 (the maximum iss is 75) out of 3580 trauma patients, hos...

In this study, ultrasonic assisted machining (UAM) technique is applied in side-surface milling experiment for glass-ceramic workpiece material. The tungsten carbide cutting-tool with diamond coating is used in conjunction with two kinds of cooling/lubrication mediums such as water-soluble (WS) cutting fluid and minimum quantity lubricant (MQL). Full factorial process parameter combinations on ...

The aim of this research is to investigate the optimization of cutting parameters (cutting speed, feed rate and depth of cut) for surface roughness and metal removal rate in turning of AISI 8620 steel using coated carbide insert. Experiments have been carried out based on Taguchi L9 standard orthogonal array design with three process parameters namely cutting speed, feed rate and depth of cut f...