One of the disadvantages of conventional milling tools is to produce a large amount of heat in cutting zone and so making the tool warmer. As a result, the tool would be worn and its life time would be reduced. Therefore, in long time machining, it is essential to change inserts and tools, continiously. A milling tool with self rotary cutting inserts was designed and manufactured that enables i...

-The technologically important case of reactive gas laser cutting is examined. A transient twodimensional (2D) model is developed specifically to investigate the effect of various CNC velocity profiles on the resulting cutting front temperature. Co-ordinated motion systems must ramp up and down to their target speeds, and therefore such accelerations must be considered. In doing so, the dynamic...

The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...

This paper presents a new method to lubricate, cool, and evacuate chips in metalworking operations using supercritical carbon dioxide (scCO2). Water-based and straight oil metalworking fluids (MWFs) are currently being used to perform these functions even though they are characterized by high economic, occupational health, and environmental costs. Carbon dioxide above its critical temperature a...

The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...

The objective of the study was to evaluate the degree of temperature change in the bone, directly adjacent to the implant site during the abutment part of one-piece implants, during procedures involving different cutting techniques. Three different one-piece implants: Osteoplant, Nobel Direct, Q-implant were cut with air-turbine burs after insertion in fresh pig ribs. Tests were performed with ...

17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...

In this study, an approach based on artificial neural network (ANN) was proposed to predict the experimental cutting temperatures generated in orthogonal turning of AISI 316L stainless steel. Experimental and numerical analyses of the cutting forces were carried out to numerically obtain the cutting temperature. For this purpose, cutting tests were conducted using coated (TiCN + Al2O3 + TiN and...

Laser straight cutting of zirconia is carried out. Temperature and stress fields developed in the cutting sections are predicted using the finite element code. The morphological changes in the cutting section are examined after incorporating the optical and scanning electron microscopes. The prediction of surface temperature is compared with its counterpart obtained from the thermocouple data. ...