The performance and stability of a direct methanol fuel cell (DMFC) with membrane electrode assemblies (MEA) using different Nafion contents (30, 50 and 70 wt % or MEA30, MEA50 and MEA70, respectively) and graphitized carbon nanofiber (GNF) supported PtRu catalyst at the anode was investigated by a constant current measurement of 9 days (230 h) in a DMFC and characterization with various techni...

The direct methanol fuel cell (DMFC) is considered a viable power production technology for portable electronics equipment (10’s-100’s watts) and transportation vehicles (10’s-100’s kilowatts). Since methanol is relatively inexpensive and a reformer or other fuel processing equipment is not required for the DMFC, this power system has the potential to be low cost, compact, reliable and fuel eff...

A deep analysis of the Fuel Cells technologies state of the art has been done in this article. After a general description of the fuel cell base structure the six most important fuel cell technologies Polymeric Electrolyte Membrane Fuel Cells (PEMFC), Direct Methanol Fuel Cells (DMFC), Alkaline Fuel Cells (AFC), Phosphoric Acid Fuel Cell (PAFC), Molten Carbonate Fuel Cell (MCFC), Solid Oxide Fu...

3.8.2. Temperature Distribution Measurements 4749 3.8.3. Two-Phase Visualization 4750 3.8.4. Experimental Validation 4751 3.9. Modeling the Catalyst Layer at Pore Level 4751 3.10. Summary and Outlook 4752 4. Direct Methanol Fuel Cells 4753 4.1. Technical Challenges 4754 4.1.1. Methanol Oxidation Kinetics 4754 4.1.2. Methanol Crossover 4755 4.1.3. Water Management 4755 4.1.4. Heat Management 475...

Abstract The function of a membrane in the fuel cell is critical to its success. major component direct methanol (DMFC) proton exchange (PEM) which must have conductivity, thermal stability, mechanical qualities, and low permeability. In this study case, film-forming structural properties Polyvinyl chloride (PVC) impelled us employ them for developing polyelectrolyte membranes (PEMs). To functi...

Passive direct methanol fuel cell (DMFC) is considered as an attractive power source for portable devices. In this study, a transient multiphase model for passive alkaline anion exchange membrane DMFC (AAEMDMFC) is developed. The results show that the power density decreases during the operation and is more difficult to maintain stable with higher current density or lower voltage. The fuel effi...

This paper presents our recent effort on application of nanoimprint technology into passive MEMS-based direct methanol fuel cell (DMFC) for chip-scale power-embedded system. We fabricated and characterized five kinds of micro DMFC with different nanoimprint pattern and catalyst layers. It was found that the measured fuel cell performance varied with the nanoimprinted patterns because they affec...