this study investigates the influence of some chemical additives such as methanol, ethanol, sodium oleat, chloroform and sodium hexametaphosphate (shmp) on the dry fine grinding of calcite (x50= 33 µm) using a stirred media mill. the experiments were carried out by a batch operation, and the change in colour properties (ry, whiteness and yellowness) of calcite powder. the results showed that th...

copper smelting slags are hard materials. therefore,to recover their copper by flotation method, grinding should be carried out to obtain optimal particle size. copper smelting slags in the bardeskan district, with work index of 16.24 kwh/st, were grinded for 65 minutes to reach an acceptable degree of freedom for the flotation tests, with particle size of 80%, smaller than 70 μm. with this gri...

surface roughness is a significant parameter which determines the efficiency of optical components. surface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. it is meaningful to rapid evaluate the surface roughness through the measurement of different grinding parameters. in this study, a cup diamond wheel (d64) is used in grinding pr...

Scratches are deleterious to precision optics because they can obscure and modulate incident laser light, which will increase the probability of damage to optical components. We here imitated the generation of brittle and ductile scratches during polishing process and endeavored to find out the possible influence of scratches on laser induced damage. Brittle scratches can be induced by spiking ...

Precracked and notched specimens were used to investigate the fracture mechanism of a bainite steel at low temperature. The critical fracture event was studied using metallographic sectioning method. The results showed that the critical cleavage event was different in the precracked and the notched specimens. At -196C, all specimens fractured at lower-shelf region without any ductile crack grow...

Aroma recovery as determined by solid phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS) was compared in coffees resulting from conventional grinding processes, and from wet grinding with cold and hot water. Freshly roasted coffee as well as old, completely degassed coffee was ground in order to estimate the relationship of internal carbon dioxide pressure in freshly roaste...

Background: The austenitic stainless steel 304L is widely used as a structural material for which the finished surface has significant effect on the service performance. A study of the grinding process with regard to the quality of the ground surfaces is therefore interesting from the point of view of both industrial application and scientific research. Method: This work investigates the influe...

Forces generated during precision wafer grinding are small and present challenges for accurate and reliable process monitoring. In this work, these challenges are met by incorporating noncontact displacement sensors into an aerostatic spindle that is calibrated to measure grinding forces from the relative motion between the spindle rotor and stator. This arrangement allows the calculation of gr...

The mechanochemical preparation of highly functionalized 3,5-disubstituted hydantoins was investigated in the presence of various poly(ethylene) glycols (PEGs), as safe grinding assisting agents (liquid-assisted grinding, LAG). A comparative study under dry-grinding conditions was also performed. The results showed that the cyclization reaction was influenced by the amount of the PEG grinding a...

The grinding force is an important index during the process, which affects surface quality and other aspects after machining. However, research on of ceramic matrix composites assisted by two-dimensional ultrasonic vibration-assisted very weak. In this paper, impact relationship between critical cutting depth maximum undeformed chip thickness removal mode was analyzed. On basis, model were deve...