Cement grouted soils, which consist of particulate soil media and cementation agents, have been widely used for the improvement of the strength and stiffness of weak ground and for the prevention of the leakage of ground water. The strength, elastic modulus, and Poisson's ratio of grouted soils have been determined by classical destructive methods. However, the performance of grouted soils depe...

OBJECTIVES In this study, we evaluated the influence of different radiant exposures provided by single-peak and polywave light-curing units (LCUs) on the degree of conversion (DC) and the mechanical properties of resin cements. MATERIALS AND METHODS Six experimental groups were established for each cement (RelyX ARC, 3M ESPE; LuxaCore Dual, Ivoclar Vivadent; Variolink, DMG), according to the ...

OBJECTIVES The purpose of this study was to investigate the effect of differences in the resin-cement elastic modulus on stress-transmission to ceramic or resin-based composite inlay-restored Class II MOD cavities during vertical occlusal loading. METHODS Three finite-element (FE) models of Class II MOD cavity restorations in an upper premolar were produced. Model A represented a glass-cerami...

A constitutive model is derived from theory of elasticity for predicting ultimate drying shrinkage of concrete. The model was extended by incorporating the semiempirical composite model proposed by Hirsch and Dougill for predicting Young's modulus of concrete. Their composite model is the geometric mean of Paul's upper and lower limit boundaries of a twophase composite. According to the shrinka...

A constitutive model is derived from theory of elasticity for predicting ultimate drying shrinkage of concrete. The model was extended by incorporating the semiempirical composite model proposed by Hirsch and Dougill for predicting Young's modulus of concrete. Their composite model is the geometric mean of Paul's upper and lower limit boundaries of a twophase composite. According to the shrinka...

Plastic concrete consists of aggregates, cement, water and bentonite, mixed at a high water cement ratio, to produce a ductile material. It is used for creating an impermeable barrier (cut-off wall) for containment of contaminated sites or seepage control in highly permeable dam foundations. The effects of water to binder ratio and clay dosage on mechanical properties of plastic concrete were i...

Calcium phosphate cements (CPCs) are extensively used as synthetic bone grafts, but their poor toughness limits their use to non-load-bearing applications. Reinforcement through introduction of fibers and yarns has been evaluated in various studies but always resulted in a decrease in elastic modulus or bending strength when compared to the CPC matrix. The aim of the present work was to improve...

The setting and hardening process of concrete is considered to be the most critical time period during the life of a concrete structure. Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear waves at the steel-concrete interface. The reflection loss has been shown to have a linear...

a r t i c l e i n f o A powerful and robust numerical homogenization method based on fast Fourier transform (FFT) is formulated to identify the viscoelastic behavior of calcium silicate hydrates (C-S-H) in hardened cement paste from its heterogeneous composition. The identification is contingent upon the linearity of the creep law. To characterize cement paste microstructure, the model develope...