In this work, the influences of ethanol and iso-butanol blended with gasoline on engine-out and post three-way catalyst (TWC) particle size distribution and number concentration were studied using a General Motors (GM) 2.0L turbocharged spark ignition direct injection (SIDI) engine. The engine was operated using the production engine control unit (ECU) with a dynamometer controlling the engine ...

diesel fuel has a limited resource and concerns over environmental pollution areleading to the use of ‘bio-origin fuels’ as they are renewable and environmentally benign. jatrophamethyl ester, an esterified biofuel, has an excellent cetane number and a reasonable calorific value.it closely resembles the behaviour of diesel. however, being a fuel of different origin, the standarddesign limits of...

This study presents comparative energy and exergy analyses of a single cylinder, four stroke Ruston diesel engine. The test was conducted by varying the load between zero and maximum while keeping the engine speed constant. Then, using the steady-state data along with energy and exergy balance equations, various performance parameters of the engine were measured. From the study it was found tha...

In Scania’s single speed engines for industrial and marine use, the engine speed is controlled by a PI-controller. This controller is tuned independent of engine type and application. This brings certain disadvantages since the engines are used in a wide range of applications where the dynamics may differ. In this thesis, the possibility to tune the controller automatically for a specific engin...

The lean-burn capability of the Diesel-ignited gas engine combined with its potential for high efficiency and low CO2 emissions makes this engine concept one of the most promising alternative fuel converters for passenger cars. Instead of using a spark plug, the ignition relies on the compression-ignited Diesel fuel providing ignition centers for the homogeneous air-gas mixture. In this study t...

A direct injection (DI) diesel engine is tested with different biodiesel-diesel blends, such as B0 (neat diesel), B5 (i.e., 5 vol. % biodiesel and 95 vol. % diesel), B10 (10 vol. % biodiesel), B20 (20 vol. % biodiesel), B50 (50 vol. % biodiesel), and B100 (neat biodiesel) for performance and emissions under different load conditions. Engine performance is examined by measuring brake specific fu...

The emission characteristics of methyl ester of refined rice bran oil – diesel blend mixed in the proportion of 10:90, 20:80, 30:70, 50:50 and 10:0 (v/v) were studied. The emission of carbon monoxide, unburnt hydrocarbons, nitric oxide and nitrogen di oxide by different fuels at various load on 3.73 kW C.I. engine were compared with respect to diesel. The emission of carbon monoxide from the en...

Using biodiesel in place of petroleum diesel is considered by several underground metal and nonmetal mine operators to be a viable strategy for reducing the exposure of miners to diesel particulate matter. This study was conducted in an underground experimental mine to evaluate the effects of soy methyl ester biodiesel on the concentrations and size distributions of diesel aerosols and nitric o...

BACKGROUND Changing the fuel supply from petroleum based ultra-low sulfur diesel (ULSD) to biodiesel and its blends is considered by many to be a viable option for controlling exposures to particulate material (PM). This is critical in the mining industry where approximately 28,000 underground miners are potentially exposed to relatively high concentrations of diesel particulate matter (DPM). T...

The effects of the valve opening and opening height are very crucial in internal combustion engine. The optimum setup for the opening cam high and timing of camshafts in engines will improve fuel economy and exhaust gas emission. This improvement can be obtained from intake (inlet) valve timing and also from exhaust (outlet) valve timing. The challenging technique is to set up the engine to the...