A new type of grafting chitosan (CTS) was synthesized using 2-hydroxyethyl-trimethyl ammonium chloride (HGCTS). The adsorption of Cr(VI) on HGCTS was studied. The effect factors on adsorption and the adsorption mechanism were considered. The results indicated that the HGCTS could concentrate and separate Cr(VI) at pH 4.0; the adsorption equilibrium time was 80 min; the maximum adsorption capaci...

Coliphages T1 and T7 of Escherichia coli were absorbed by kaolinite (K) and montmorillonite (M). Maximum adsorption of T7 (96%) to M was greater than that of T1 (84%), but the adsorption of both coliphages to K was the same (99%). Positively charged sites (i.e., anion exchange sites) on the clays appeared to be primarily responsible for the adsorption of T1 to K but only partially responsible f...

background and purpose:the presence of dyes in wastewaters may cause serious problems for the environment because of their high toxicity to aquatic organisms and unfavorable aesthetical impact. in the present study, multi-walled carbon nanotubes (mwcnts) were used for removal of anionic dyes direct blue 106 (db106) and acid green 25 (ag25), from water samples. materials and methods:mwcnts were ...

heavy metals such as cu(ii) and pb(ii) are among the hazardous pollutants that lead to severe ecological problems and have a toxic effect on living organisms. the removal of cu(ii) and pb(ii) by iranian bentonite experiment were conducted in single component and multi component systems. the bentonite from the birjand area was characterized by x-ray diffraction pattern and ftir spectroscopy. the...

Waste materials with no further treatment such as orange barks from commercial oranges may act as adsorbent for the removal of Pb. Batch kinetic and equilibrium experiments were conducted to study the effects of contact time, initial pH, adsorbent dose and initial concentration of lead. The results show that the equilibrium was achieved less than 30 min of contact time. Three adsorption isother...

   In the present study, CeO2/Fe2O3 nanocomposite was prepared by co-precipitation method and its application was investigated for arsenic removal from water. Characterization of the nano sized adsorbent particles was carried out using SEM and XRD techniques. Systemic adsorption experiments were performed in batch systems and the optimum conditions were obtained. The effects of p...

The adsorption study was conducted on three Japanese soils with different soil properties to characterize the adsorption pattern of Arsenic (As). Double tube method was used to find out the effect of soil moisture levels on As adsorption. For this study, besides double tube method, conventional batch method also was used. The As adsorption showed two phase kinetics. An initial and rapid adsorpt...

In the present work, superparamagnetic iron oxide nanoparticles (SPION) surface-coated with 3-mercaptopropanoic acid (3-MPA) were prepared and their feasibility for the removal of arsenate from dilute aqueous solutions was demonstrated. The synthesized 3-MPA-coated SPION was characterized using transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and Fourier transform infra-...