• Novel ORC system operating with two-phase expansion and radial-inflow turbine. Single- multi-objective cycle optimisation for 150, 200 250 °C heat sources. MM MDM are optimal fluids producing up to 28% more power than single-phase ORC. Mean-line turbine completed Feasible subsonic rotor geometries obtained, candidate turbines designs proposed. Previous investigations suggest the output from w...

We have developed a new wind turbine system that consists of a diffuser shroud with a broad-ring brim at the exit periphery and a wind turbine inside it. The shrouded wind turbine with a brimmed diffuser has demonstrated power augmentation by a factor of about 2–5 compared with a bare wind turbine, for a given turbine diameter and wind speed. This is because a low-pressure region, due to a stro...

High-pressure air enters the air-turbine of the dental handpiece and strikes the blades to drive the impeller. The air-turbine has impeller and the air tube is connected to the air-turbine housing. The flowfield of the air-turbine were investigated for the optimum air-turbine design using ANSYS CFX. The objective of the research was to find an optimum design variables for the air-turbine to inc...

Wake recovery constrains the downstream spacing and density of turbines that can be deployed in turbine farms and limits the amount of energy that can be produced at a hydrokinetic energy site. This study investigates the wake recovery at the downstream of a 1:10 axial flow turbine model using a pulse-to-pulse coherent Acoustic Doppler Profiler (ADP). In addition, turbine inflow and outflow vel...

In the background of the offshore wind turbine monitoring applications, we analyzed the characteristics of the offshore wind turbine monitor and gave the architecture of the offshore wind turbine monitor system. We designed the system model of blade wear and vibration in offshore wind turbine, and combined with energy efficient data aggregation algorithm based on the specific application to mon...

Turbine blade cooling is considered as the most effective way of maintaining high operating temperature making use of the available materials, and turbine systems with wet compression have a potential for future power generation because of high efficiency and high specific power with a relatively low cost. In this paper performance analysis of wet-compression gas turbine cycle with turbine blad...

A new turbine model validation technique that is based on adaptation of look-up tables is described this paper. Simulation results from the VIDYN turbine simulation program and measurements from Big Glenn wind turbine, located outside Gothenburg, Sweden are used as an input to this new model validation technique. The models of the flapwise bending moment and power coefficient are validated for ...

The forces on a turbine at extreme wind conditions when the turbine is parked is one of the most important design cases for the survivability of a turbine. In this work, the forces on a blade and its support arms have been measured on a 12 kW straight-bladed vertical axis wind turbine at an open site. Two cases are tested: one during electrical braking of the turbine, which allows it to rotate ...

Organic Rankine Cycles using radial turbines as expanders are considered as one of the most efficient technologies to convert heavy-duty diesel engine waste heat into useful work. Turbine similarity design based on the existing air turbine profiles is time saving. Due to totally different thermodynamic properties between organic fluids and air, its influence on turbine performance and loss mech...