The purpose of this study is to evaluate ultrasonic suture welding of monofilament suture in an animal model of rotator cuff repair with biomechanical and histologic analyses. We randomly assigned 46 shoulders in 23 rabbits to 1 of 3 treatment groups: sham-operated (n = 15), knotted (n = 15), and welded (n = 16). Supraspinatus defects were surgically created and acutely repaired with suture anc...

Electrical connection of dissimilar metals will lead to galvanic corrosion. Therefore, overall surface treatment is necessary for the protection of dissimilar metal welded parts. However, serious unbalanced reactions may occur during overall surface treatment, which makes it difficult to prepare integral coating. In this paper, an overall ceramic coating was fabricated by plasma electrolytic ox...

Study of Image quality parameters like Contrast, SNR and MTF for Digital Radiography with FPD were carried out at different X-Ray tube variables like energy of X-Ray (kV) and tube current (mA) for different welded tube thicknesses. Experiments of Digital Radiography were carried out on butt welded tubes. Images of these welded tubes were taken with different kV and mA on actual working setup ke...

The aim of the present research is to investigate the fatigue behaviour of friction stir (FS) welded tubular joints in aluminium alloy subjected to torsional fatigue loading. To manufacture the samples which were tested, an MTS I-STIR process development system was equipped with a retracting tool specifically designed for these tubular welds. Al 6082-T6 FS welded samples were tested under cycli...

During the explosive welding, bonding interface of welded materials was fast heated due to high strain rate and drastic plastic deformation. The periodical wave interface, with an amplitude ~300 μm a period wavelength ~800 μm, identifiable as uniform formed in interface. details formation melting zone mixing welding at were observed. Combined Ti-Fe binary phase diagram principle diffusion compo...

Original scientific paper The joints made by fusion of materials are exposed to the influence of residual stresses induced by welding thermal cycles. Residual stresses were measured on butt welded plates made of NIOMOL 490K, before and after reparation. The objective of this paper is to compare three methods of residual stress measurement (hole-drilling method, x-ray diffraction and directional...

This study investigated the effects of the hot isostatic pressing process on the crack healing, microstructure, and mechanical properties of the laser repair-welded CM247LC precipitation-hardened superalloy. To ensure the strength of the repair-welded area, this study used the direct re-melting approach, and simulated the repair welding with the filler addition, which has a chemical composition...