This study presents a novel wideband absorber for radar cross section (RCS) reduction. Unlike previous absorber designs that use multilayer lossy materials, this study proposes a design based on a planar antenna array that adopts a bowtie dipole structure as the unit cell. The complete design procedure was investigated by using examples for singleand dual-polarized incident wave designs. The me...

The design and simulation of a wide angle, spectrally selective absorber/emitter metallic photonic crystal (MPhC) is presented. By using dielectric filled cavities, the angular, spectrally selective absorption/emission of the MPhC is dramatically enhanced over an air filled design by minimizing diffraction losses. Theoretical analysis is performed and verified via rigorous coupled wave analysis...

Using a Cr:ZnS wafer as the saturable absorber, diode-pumped passively Q-switched mode-locking of a Tm:YAP laser at 1976 nm has been realized for the first time, to the best of our knowledge, and nearly 100% modulation depth of Q-switched mode-locking was achieved. The width of the mode-locked pulse was estimated to be about 980 ps with a repetition rate of 350 MHz within a roughly 300-ns-long ...

Absorption of wave energy may be considered as a phenomenon of interference between incident and radiated waves generated by an oscillating object; a wave-energy converter (WEC) that displaces water. If a WEC is very small in comparison with one wavelength, it is classified as a point absorber (PA); otherwise, as a 'quasi-point absorber'. The latter may be a dipole-mode radiator, for instance a...

As worldwide energy consumption continues to increase, so does the demand for renewable energy sources. The total available wave energy resource for the United States alone is 2,640 TWh/yr; nearly two thirds of the 4,000 TWh of electricity used in the United States each year. It is estimated that nearly half of that available energy is recoverable through wave energy conversion techniques. In t...