Flexure hinges inherently lose stiffness in supporting directions when deflected. In this paper a method is presented for optimizing the geometry of flexure hinges, while supporting stiffnesses are retained. These hinges are subjected to a load and deflected an angle of up to ±20°. The measure of performance is defined by the first unwanted eigenfrequency, which is closely related to the suppor...

This paper presents the derivation of the kinetostatic model of a flexure-based 3-RRR compliant micro-motion stage. The kinetostatic model has closed-form equations and flexure hinge compliances are one of the variables in the model. Researchers have an option of selecting the most suitable flexure hinge compliance equations to calculate the kinetostatics of the stage. Two cases are studied whe...

Flexure parallel mechanism (FPM) possessing selective actuation (SA) feature can be used as a micropositioner. The design of SA FPMs consists of type synthesis of parallel mechanisms possessing the required number of degree of freedom (DOF), geometric arrangement of the structure to obtain the SA and conversion of the kinematic mechanism into the flexure mechanism. This paper focuses on the SA ...

The effect of the temperature variation on a unimorph piezoelectric cantilever is studied. Its influences on the thermal expansion, the piezoelectric constant, the transient part and the creep are experimentally analyzed. Afterwards, a H∞ controller is synthesized in order to reject the thermal disturbance and to reach performances required in micromanipulation. Finally, the closed-loop experim...

The research on the mechanical characteristics of concrete-filled steel tubular composite frame under high temperature fire environment is one hotspots. In this paper, finite element simulation software used to analyze structure. failure mode flexural deformation structure introduced. results and displacement single-layer single span two-layer two-span are deeply studied, including different fi...

A nano-displacement sensing method for micro-opto-electro-mechanical-systems (MOEMS) is proposed. The method is based on a square attice photonic crystal (PC) made of dielectric silicon posts, mounted on a micro mechanical flexure. The flexure is fixed at one end and is free to ove at the other, to enable elastic deformations that, by being transferred to the photonic crystal array, modify its ...

this article studied static deflection, natural frequency and nonlinear vibration of a clamped-clamped microbeam under discontinues electrostatic actuation. the electrostatic actuation was induced by applying ac-dc voltage between the microbeam and electrode plate. in contrast to previous works, it was assumed that length of the electrode plate was smaller than that of the microbeam. in additio...

In the quest to obtain a precise set of aircraft attitude parameters the modeling of wing flexure can become an important issue, especially when short baselines are being used. Previous techniques for the estimation of wing flexure have relied on a constrained Least Squares process to determine the displacement at each epoch before the estimation of the attitude parameters. As will be shown in ...

We present the results of forward modelling of the Northern Alpine German-Austrian Molasse Basin, which forms part of the Northern Alpine Foreland Basin (NAFB) extending from Lake Geneva in the west to Lower Austria in the east. The observed deflection of the European plate under the NAFB has been modelled along five profiles perpendicular to the basin axis. Models treating the deflection of th...

OBJECTIVES To assess the effect of interfacial surface roughness on the flexure strength and fracture mode and origin utilizing an in-vitro assessment of the clinical failure conditions expected for all-ceramic crowns and the connector area of fixed partial dentures (FPDs) using bilayered ceramic specimens tested in bi-axial flexure. METHODS Sets of 20 bilayered composite discs, with core:den...