Fretting wear at the dimple/gimbal interface of a hard disk drive suspension was investigated for stainless steel dimples in contact with stainless steel gimbals coated with diamondlike carbon (DLC) of different thicknesses and different elastic moduli. Scanning electron microscopy (SEM) was used to evaluate the size and characteristics of the wear scar of both the dimple and the gimbal. Fretti...

A metallurgical zirconium nitride (ZrN) layer was fabricated using glow metallurgy using nitriding with zirconiuming prior treatment of the Ti6Al4V alloy. The microstructure, composition and microhardness of the corresponding layer were studied. The influence of this treatment on fretting wear (FW) and fretting fatigue (FF) behavior of the Ti6Al4V alloy was studied. The composite layer consiste...

A new advanced system for Ultrasonic Peening (UP) of materials, details and welded elements was developed recently. The UP produces a number of beneficial effects in metals and alloys. Foremost among these is increasing the resistance of materials to surface-related failures, such as fatigue, fretting fatigue and stress corrosion cracking. The beneficial effect is achieved mainly by relieving o...

Fretting damage to fuel rods reduces the service lives of the fuel assemblies and therefore increases reactor operating costs. The future development of fretting-resistant spacer grids necessitates the investigation of fretting behavior by means of model tests. This paper presents the results of such tests carried out to investigate fretting in three different fuel rod support configurations. T...

Modular femoral heads have been used successfully for many years in total hip arthroplasty. Few complications have been reported for the modular Morse taper connection between the femoral head and trunnion of the stem in metal-on-polyethylene bearings. Although there has always been some concern over the potential for fretting, corrosion, and generation of particulate debris at the modular junc...