This paper aims to present an experimental investigation for optimum tribological behavior (wear depth and coefficient of friction) of electroless Ni-P-Cu coatings based on four process parameters using artificial bee colony algorithm. Experiments are carried out by utilizing the combination of three coating process parameters, namely, nickel sulphate, sodium hypophosphite, and copper sulphate,...

The wear mechanism of plasma electrolytic nitrocarburised (PEN/C) 316L stainless steel samples was studied after a pin on disc wear test. The surface morphology of samples after application of PEN/C process was studied using scanning electron microscope technique. The sliding tracks resulting from the wear tests on the treated specimens indicated no signs of plastic deformation and adhesive wea...

To lower the friction coefficient and increase the wear resistance of epoxy, nanoparticles of zinc oxide and polytetrafluoroethylene (PTFE) were added in small volume percents to an epoxy matrix. Tribological testing of the samples in this study was completed on a linear reciprocating tribometer with a 250 N normal load and a 50.8 mm/s sliding speed. Several samples were made and tested followi...

Tribology is the science and technology of interacting solid surfaces in relative motion, and its topics include the study of lubricants, lubrication, friction, wear, and bearings. It is estimated that friction and wear cost the US economy 6% of the gross national product [1]. For example, 5% of the total energy generated in an automobile engine is lost to frictional resistance. Also notable ar...

The effects of polytetrafluoroethylene (PTFE), graphite, ultrahigh molecular weight polyethylene (UHMWPE), and their compounds on mechanical and tribological properties of glass-fiber-reinforced polyamide 6 (PA6/GF) were studied. The polymeric materials were blended using twin-screw extruder and subsequently injection molded for test samples. Mechanical properties were investigated in terms of ...

Industrial robots are designed to endure several years of uninterrupted operation and therefore are very reliable. However, no amount of design effort can prevent deterioration over time, and equipments will eventually fail. Its impacts can, nevertheless, be considerably reduced if good maintenance/service practices are performed. The current practice for service of industrial robots is based o...

The friction and wear behaviour of ZrO*-Y203, Zr02-Y203--Ce02 and ZrQ--A1203 composite ceramics against hardened steel AISI-52100 were investigated using a pin on plate configuration under reciprocating motion. The reproducibility of the results was examined in this configuration. Wear characteristics were separated into system and material contributions. Under the conditions used, all the cera...

We have been developing a process design CAE system to predict die wear life in the process design stage for the hot forging of steel. Our goal is to reduce production costs by shortening the development period, while maximizing the life of the die. In our system, we use an expression that defines the relationship between die wear, die strength, and friction factors, such as die pressure, slidi...