We present two geometric descriptions of the frictional properties of a rigid body sliding on a planar surface. The limit surface LS, from classical plasticity theory, is the boundary of the set of all possible frictional forces and moments that can be sustained by the frictional interface. Zhukovskii’s moment finction is the frictional moment as a function of the instantaneous center of rotati...

To identify genes involved in stress resistance and heat hardening, replicate lines of Drosophila melanogaster were selected for increased resistance to knockdown by a 39 degrees heat stress. Two selective regimes were used, one with and one without prior hardening. Mean knockdown times were increased from approximately 5 min to > 20 min after 18 generations. Initial realized heritabilities wer...

Stem cold hardening developed to different levels in citrus types tested in controlled environments. Exotherms indicated ice spread was more uniform and rapid in unhardened than in cold-hardened stems. All attempts to inhibit the functioning of citrus leaves resulted in less cold hardening in the stems. Citrus leaves contribute a major portion of cold hardening in the wood.

PURPOSE To compare computed tomography (CT) number measurement consistency under different beam hardening conditions in phantom experiment between dual-energy spectral CT and conventional CT imaging. MATERIALS AND METHODS A phantom with 8 cells in periphery region and 1 cell in central region were used. The 8 conditioning tubes in the periphery region were filled with 1 of the 3 iodine soluti...

In this paper the effect of different hardening models in simulating the U-bending process for AA5754-O and DP-Steel, taking a benchmark of NUMISHEET 93 2-D draw bending, has been discussed. The hardening models considered in simulations are: isotropic hardening, pure (linear) kinematic hardening and combined (nonlinear kinematic) hardening. The influence of hardening models on predicting sprin...

The transition from frictional to lubricated flows of a dense suspension of non-Brownian particles is studied. The pertinent parameter characterizing this transition is the Leighton number Le=eta(s)gamma / sigma, the ratio of lubrication to frictional forces. Le defines a critical shear rate below which no steady flow without localization exists. In the frictional regime the shear flow is local...

Antimony nanoparticles deposited under UHV conditions on HOPG are found to exhibit an intriguing frictional behavior characterized by a distinct clearly separated double dual behavior of dependence of the frictional force on contact area. We present the first realistic simulations, density functional modeling adapted to accommodate van der Waals interactions, of the (double) dual frictional beh...

With the advancement of the field of biotribology, considerable interest has arisen in the study of cell and tissue frictional properties. From the perspective of medical device development, the frictional properties between a rigid surface and underlying cells and tissues are of a particular clinical interest. As with many bearing surfaces, it is likely that contact asperities exist at the siz...

OBJECTIVE To test the frictional resistance forces (FRS) generated between several archwires and (1) interactive self-ligating (ISL) brackets and (2) conventionally ligated (CL) brackets. MATERIALS AND METHODS Frictional forces produced between three different archwire combinations and self-ligating (SL) brackets (ceramic and metal-slot or all-metal) and CL brackets (metal or ceramic) were ev...

The effect of the initial microstructure and intercritical annealing on mechanical properties and work-hardening response of a high-formability low carbon steel were studied. The work-hardening analysis was based on the modified Crussard–Jaoul method. The ferritic-pearlitic sheets showed low strength and high total elongation with the appearance of the yield point phenomenon. The occurrence of ...