Design of polymeric membranes for fuel cells application requires suitable selection and modification of polymers. This review accounts the various polymeric membranes available for use in fuel cells, advantages of sulphonation of polymers, various sulphonation methods and the characterization techniques. Presently, SPEEK finds extensive application as polymeric membrane in fuel cells. The adva...

the waste tyres represent a source of energy and valuable hydrocarbon products. waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. the effects of basic catalysts (mgo and caco3) were studied on the pyrolysis products. the distribution ratio of gas, liquid and char with mgo and caco3 were 24.4:39.8:35.8 wt % and 32.5:32.2:35.2 wt % respectively at 350°c for 2...

Blends of biodiesels produced from soapnut oil and high-oleic free fatty acids (FFAs), which are potential non-edible oil feedstocks, were investigated with respect to their fuel properties. The soapnut oil methyl esters (SNME) had satisfactory fuel properties with the exception of its high cold filter plugging point. In contrast, the biodiesel from the FFAs had favorable fuel properties such a...

This paper examines polymer film morphology and several important properties of polyethylene-graft-sulfonated polyarylene ether sulfone (PE-g-s-PAES) proton exchange membranes (PEMs) for direct methanol fuel cell applications. Due to the extreme surface energy differences between a semi-crystalline and hydrophobic PE backbone and several amorphous and hydrophilic s-PAES side chains, the PE-g-s-...

In this study, corn oil as vegetable oil, chicken fat and fleshing oil as animal fats were used to produce methyl ester in a biodiesel pilot plant. The FFA level of the corn oil was below 1% while those of animal fats were too high to produce biodiesel via base catalyst. Therefore, it was needed to perform pretreatment reaction for the animal fats. For this aim, sulfuric acid was used as cataly...