in this study, the blast furnace slag was used as absorbing bed and then, its ionic adsorption was studied. for this reason, various experimental parameters such as ph, contact time and the primary ion concentration were investigated. the remaining concentrations of ions such as; mn2+ and fe2+ in water were measured by atomic adsorption spectroscopy. the chemical and phase composition of slag, ...

The effect of alkali content (% K2O + %Na2O) on the mechanical properties of alkali activated blast furnace paste has been investigated. The paper presents the study on workability, compressive strength, split tensile strength and microstructure of alkali activated blast furnace slag paste specimens prepared by using of sodium silicate and potassium hydroxide solution as activators. The experim...

Microstructural and mechanical properties of alkali activated binders based on blends of Colombian granulated blast furnace slag (GBFS) and fly ash (FA) were investigated. The synthesis of alkali activated binders was conducted at 85 °C for 24 h with different slag/fly ash ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100). Mineralogical and microstructural characterization was carried out b...

In this work, three different samples of solid industrial wastes cement kiln dust (CKD), granulated blast furnace slag and marble sludge were employed in a cold bonding pelletization process for the sustainable production of artificial aggregates. The activating action of CKD components on the hydraulic behavior of the slag was explored by evaluating the neo-formed phases present in several hyd...

Peat normally has high organic matter content and is generally associated with high compressibility and high magnitude and rates of creep. It may also be associated with poor strength characteristics and a risk of large deformation. The main specifications in the peat nature are the presence of acidic or less commonly alkaline media, combined with a high level of ground water. One of the most c...

The paper embodies the influence of thermal treatment on the morphology, composition and leaching behaviour of titania slag. When Ti-slag was subjected to heat treatment, it developed pores and oxidized at high temperature. This slag consists mainly of a M3O5 phase with an orthorhombic structure. The decrepitation was studied by oxidizing the titania slag sample produced in a pot/muffle furnace...

The Joint Transportation Research Program serves as a vehicle for INDOT collaboration with higher education institutions and industry in Indiana to facilitate innovation that results in continuous improvement in the planning, design, construction , operation, management and economic efficiency of the Indiana transportation infrastructure. NOTICE The contents of this report reflect the views of ...

The Clean Coal Technology (CCT) Demonstration Program is a government and industry co-funded effort to demonstrate a new generation of innovative coal utilization processes in a series of " showcase " facilities built across the country. These projects are carried out on a sufficiently large scale to prove commercial worthiness and generate data for design, construction, operation, and technica...

Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of ...