This paper introduces an intelligent system for monitoring and recognition of process disturbances during short-circuiting gas–metal arc welding. It is based on the measured and statistically processed data of welding electrical parameters. A 12-dimensional array of process features is designed to describe various welding conditions and is employed as input vector of the intelligent system. Thr...

In this paper a monitoring system that simplifies the finding of optimal welding parameters, the analysis and the optimisation of pulsed gas metal arc welding is described. The system allows the visual online observation of all states of the process, including the droplet transfer, without an additional lighting unit. Additionally, the measurement of electrical welding parameters during image r...

In this study, the effect of various welding parameters on the weldability of Mild Steel specimens having dimensions 50mm× 40mm× 6 mm welded by metal arc welding were investigated. The welding current, arc voltage, welding speed, heat input rate are chosen as welding parameters. The depth of penetrations were measured for each specimen after the welding operation on closed butt joint and the ef...

Plates of 3–5 mm in thickness were extracted from an AZ91D ingot and then butt joints of the plates were produced using tungsten inert gas (TIG) welding method. The TIG arc was also used to deposit welding beads on some of the thin plates. No cracking was found in the butt joints. However, hot cracking was always observed to propagate from the heat affected zone (HAZ) under the welding bead int...

Evaluation of welding process such as metal inert gas welding and tungsten inert gas arc welding on tensile, bend and hardness properties of austenitic stainless steel SS347H(18Cr 10Ni 1Cb ), T22(21⁄4Cr Mo) and T91(9Cr 1Mo V) grades are studied. Tubes of 54 mm of outer diameter and 4 mm of wall thickness is used as a base material in the following combination SS347H VS T91 and T91 VS T22 is wel...

We investigated relationships between occupational exposure to gas and arc welding fumes and the risk of lung cancer among workers exposed to these agents throughout the spectrum of industries. Two population-based case-control studies were conducted in Montreal. Study I (1979-1986) included 857 cases and 1066 controls, and Study II (1996-2001) comprised 736 cases and 894 controls. Detailed job...

An adaptive control based on fuzzy logic has been implemented for Gas Tungsten Arc Welding (GTAW). This adaptive controller eliminates the problems frequently experienced with traditional Automatic Voltage Control (AVC) systems, which do not adequately perform for all operational conditions because of the non-linear relationship between the arc voltage, current and arc length. This paper examin...

Double-Electrode Gas Metal Arc Welding, referred to as DE-GMAW, is a novel process which decouples the melting current into base metal current and bypass current by adding a bypass torch to a conventional GMAW system to establish a bypass arc. This makes it possible to increase the melting current while the base metal current still be controlled at a desired level. Experiments have been done to...

This paper presents the results of a study aimed at establishing the temperature distribution during the welding of magnesium alloy sheets by Pulsed Current Gas Tungsten Arc Welding (PCGTAW) and Constant Current Gas Tungsten Arc Welding (CCGTAW) processes. Pulsing of the GTAW welding current influences the dimensions and solidification rate of the fused zone, it also reduces the weld pool volum...