In this work, poly (ether-block-amide) (PEBA)/ceramic hollow fiber (HF) composite membranes with high flux were prepared by dip-coating the ceramic hollow fiber with PEBA polymer solution for pervaporation (PV). The membrane fabrication was optimized by finely tailoring the coating parameters such as the viscosity and concentration of PEBA coating solution, which made the pervaporation flux as ...

Results of studies reported here show that adsorption could result in considerable accumulation of hormones on hydrophobic hollow fiber membrane surfaces during filtration of trace-hormone-containing feed solutions with a linear adsorption isotherm applicable over the majority of the estrone concentration range examined (2.6-154 ng/L). Models based on both diffusion and surface reaction limitat...

Vapor absorption refrigeration system efficiently could be driven by the low grade renewable heat associated with the exhaust gas from the car engine, and uses the eco-friendly refrigerant, i.e. water. The absorption cycle, however, has not yet obtained much attraction in the automobile application due to its large volume and weight per unit of cooling capacity, which has limited to use. A micr...

Hollow fiber membrane offers the advantage to integrate catalytic conversion, product separation and catalyst recovery into a single separation process compared to conventional systems. Polypropylene (PP) hollow fiber membrane is a chemically inert and stable membrane with high potential for enzyme immobilization. The surface properties of polypropylene have been modified by radiation induced g...

Based on the results of in vitro studies of many experimental models, a silicone hollow fiber membrane oxygenator for pediatric cardiopulmonary bypass (CPB) and extracorporeal membrane oxygenation (ECMO) was developed using an ultrathin silicone hollow fiber with a 300 microm outer diameter and a wall thickness of 50 microm. In this study, we evaluated the gas transfer performance of this oxyge...

Abstract In this study, a mathematical model is proposed for CO2 separation from N2/CO2 mixtureusing a hollow fiber membrane contactor by various absorbents. The contactor assumed as non-wetted membrane; radial and axial diffusions were also considered in the model development. The governing equations of the model are solved via the finite...

This study aims to investigated the effect of aeration mode on membrane bioreactors (MBRs) using a self-designed integrated hollow fiber MBR and flat sheet organic for rural greywater treatment. The pollutant removal efficiency, characteristics activated sludge mixed liquor, mechanisms fouling were systematically analyzed under intermittent continuous modes. results indicate that permeability M...