In a gas-liquid stirred reactor, gas tends to accumulate in low-pressure regions behind the impeller blades. Such gas accumulation forming so-called gas cavities, significantly alters impeller performance characteristics. We have computationally investigated gas-liquid flow generated by a Rushton turbine. Rotating Rushton turbine generates trailing vortices behind the blades, which enhance the ...

The impeller blades are very important and precise parts in turbine, but they can be worn and deformed easily. In this paper, we present a novel approach to detect the shape of the impeller blades. The proposed approach is to compare the designed 3D model of the impeller blades with the virtual 3D model of the tested part which is reconstructed by non-contact coordinate measuring machine. The n...

The object of this work was to evaluate the capability of numerical simulation to predict different features of non-Newtonian fluid mixing process. A relatively simple impeller (six bladed vane rotor) was used for the mixing of carboxymethyl cellulose. A LDA method was used to measure the tangential velocity at two points inside the mixing vessel. Using visualization, a significant vortex above...

This paper presents a method for estimating the potential for liquid droplet erosion in compression system components, such as the impeller of centrifugal compressors. The erosion model selected is used to calculate a threshold velocity that represents the limit for the onset of erosion damage. The parameters used in the model include the liquid phase density and viscosity, impeller geometry, s...

The aim of this paper is to introduce numerical procedures to calculate the flow parameters in the bladed space of a cylindrically bladed radial-flow fan-impeller. The characteristics of the flow belonging to different duty points of the fan were determined by the numerical procedure. In this calculation, the blade effects as well as the effects of the fluid friction and the turbulence were tak...

Dispersion of liquid–liquid systems is commonly applied in industrial processes such as extraction, suspension, and emulsion polymerization. This article describes the influence of the quality of emulsification on the course and outcome of a batch-emulsion polymerization of styrene and vinyl acetate. From visualization experiments and polymerizations in combination with reaction calorimetric st...

According to tradition, permanent maglev cannot achieve stable equilibrium. The authors have developed, to the contrary, two stable permanent maglev impeller blood pumps. The first pump is an axially driven uni-ventricular assist pump, in which the rotor with impeller is radially supported by two passive magnetic bearings, but has one point contact with the stator axially at standstill. As the ...

This paper describes the shape optimization of impeller blades for a anti-heeling bidirectional axial flow pump used in ships. In general, a bidirectional axial pump has an efficiency much lower than the classical unidirectional pump because of the symmetry of the blade type. In this paper, by focusing on a pump impeller, the shape of blades is redesigned to reach a higher efficiency in a bidir...

To finalize the design of the next generation of the HeartQuest left ventricular assist device, a suitable impeller had to be designed and tested. The new prototype was based on calculations and test results of previous designs, but required several changes to decrease the size. For most pump designs, this is a simple matter of altering impeller geometry and rotational speed to achieve the desi...

Sewage water pumps very often are equipped with impellers featuring a small number of blades which therefore provide big cross sections of the flow channel. Single-blade impellers comprise the smallest possible number of blades and are known as non-clogging pumps. But severe disadvantages occur during operation, because the timevariant flow in such pumps results in periodic unsteady flow forces...