y-tial intermetallic alloy have a good potential for use as biomaterial, due to its good corrosion resistance. in this paper, two fundamental electrochemical techniques namely electrochemical impedance spectroscopy and potentiodynamic anodic polarization were used to evaluate the corrosion performance of g-tial in ringer's solution. surface modification treatments were employed with the pu...

A mini-flowloop was developed to study CO2 corrosion and corrosion/erosion interactions, and to assess the effectiveness of inhibitors under conditions that simulate multi-phase pipelines. The miniflowloop was used to study the effect of testing time, steel chemistry, velocity, temperature, fluid chemistry, sand and inhibitors on corrosion rates. The measured corrosion rates in inhibited and un...

The major objective in glass tank melters is to optimize the entire process by reducing the maximum temperature of melting, improving refractory performance and/or improving melter fuel efficiency. The required characteristics of refractories used in melters are: thermal shock resistance, corrosion resistance, controlled expansion behavior, low thermal conductivity, and adequate creep resistanc...

Power District (NPPD) implemented an inspection program to determine the extent of condition for this type of widely used conductor. Other companies which have had related issues with similar types of corrosion have simply replaced their existing insignificant miles of conductor; however NPPD transmission system includes over 2000 miles of this particular conductor. Throughout 2012, many other ...

The corrosion process involves a sequence of reactions in which a metal or an alloy is attacked by an aggressive agent [4, 13]. Due to their particular electronic structure characterized by the presence of free electrons in the crystalline network, metals and alloys react chemically or electrochemically and thus may suffer corrosion processes [13, p.85]. The stabile chemical state of the metals...

Five non-precious Ni-Co based alloys were analyzed with respect to their corrosion behaviour. The correlation between the amount of the elements Cr, Mo, V and the corrosion behaviour, expressed by the PREN (pitting resistance equivalent number) index in the case of the allied steels, was extended for Ni-Cr and Co-Cr dental alloys characterization. Open circuit potential, corrosion current densi...

The understanding of corrosion behavior in NiTi is critical for the devices using this shape-memory alloy. In order to improve the surface properties of NiTi such as corrosion resistance, plasma source ion implantation (PSII) technique was employed with oxygen as incident ions at three levels of implantation dose (5x10(16), 1x10(17) and 3x10(17) ions/cm(-2)). Pitting corrosion and wear-corrosio...

Sulfur dioxide (SO2), a typical gaseous compound found in the atmosphere, corrodes metals, particularly outdoors. When SO2 adsorbs on the surface electrolyte, it easily dissolves, resulting in the formation of protons (H+) and bisulfite ions (HSO3). The former reduces the pH of the surface electrolyte, which promotes metal dissolution. Silver and copper are commonly used in the electronic compo...

A TCP–TCL model is established to describe the relationship between the thickness of the corrosion-filled paste (CP) and that of the corrosion layer (CL). This model can describe the phenomenon that the corrosion filling in the concrete pores and accumulating at the steel/concrete interface occur synchronously. Based on the TCP–TCL model, a corrosion-induced concrete cracking model, which can q...

The self-assembled monolayer (SAM) was prepared using octadecyl trichlorosilane (OTS) in distilled solution on the copper surface. The effect of inhibitor concentration on the rate of inhibition efficiency and corrosion rate in corrosion medium on copper by using polarization curves, electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM) was studied. The results showed...