The role of microstructure on hot deformation behavior of sintered Cu-28Zn prealloyed powder compacts was investigated by a series of isothermal hot compression tests in the temperature range of 550- 850°C at strain rates of 0.001, 0.01, 0.1 and 0.5 s-1, by taking into consideration the Hyperbolic Sine functional behavior to analyze the deformation behavior of the alloy. The results indicate th...

In this article, commercially pure copper samples were severely deformed by equal channel angular pressing (ECAP) up to eight passes at room temperature. The effects of severe plastic deformation on the microstructure, mechanical properties, and electrical conductivity of the copper were investigated. The microstructure evolution was followed by optical microscope and field emission scanning el...

This paper provides an overview on obtaining low-carbon ultra-fine grained dual-phase steels through rapid intercritical annealing of cold-rolled sheet as improved materials for automotive applications. A laboratory processing route was designed that involves cold-rolling of a tempered martensite structure followed by a second tempering step to produce a fine grained aggregate of ferrite and ca...

The microstructure of granular materials is the main factor determining their macroscopic behaviour. We study systematically the statistical characteristics of volume elements (called quadrons) of microstructures of monoand polydisperse planar disc packs granular and report a number of new results. The packs analysed were of different intergranular friction coefficients ,μ , contained about 20,...

Ultrafine-grained die-upset Nd-Fe-B magnets are of importance because they provide a wide researching space to redesign the textured structures. Here is presented a route to obtain a new die-upset magnet with substantially improved magnetic properties. After experiencing the optimized heat treatment, both the coercivity and remanent magnetization of the Dy-Cu press injected magnets increased su...

To understand the plastic ̄ow behavior of commercially pure vanadium under high strain rates, uniaxial compression tests of cylindrical samples are performed using UCSD's enhanced Hopkinson technique. True strains exceeding 50% are achieved in these tests, over a range of temperature from 77 to 800 K at the strain rates of 2500 and 8000 sÿ1. The microstructure of the deformed and undeformed sam...

In order to research the evolution of microstructures and properties SCM435 wire rod after annealing with different initial structures, two kinds microstructure (B+M F+P) rods were used simulate spheroidizing annealing, softening stress relief processes respectively. The results show that under same process conditions, spheroidization grade B+M was 1-2 higher than F+P, while hardness does not d...