the used activated carbon was derived from pine-cone and was used for the removal of acid black 1(ab1) and acid blue 113(ab113) dyes. a batch sorption study was carried out in order to obtain optimum isotherm model. the study showed the best fit of the adsorption isotherm data was obtained using the langmuir model for both dyes. the monolayer maximum saturation capacities of ab1 and ab113 dyes ...

The paper discusses the results of a study emphasizing the practical usefulness of a low-cost agricultural resource, “maize bran”, as sorbent for the removal of Cu(II) ions from wastewaters. To establish the optimum conditions of batch retention, the effect of initial solution pH, sorbent dose, initial concentration, time contact and temperature on Cu(II) sorption by maize bran has been studied...

The use of raw sawdust, RSD, of locust bean tree (Parkia biglobosa), a low-cost, locally available agroforestry waste as an adsorbent for removing a ternary mixture of heavy metals comprising of copper, lead and nickel (TMS) from aqueous solution was examined. Equilibrium data obtained from batch adsorption experiments were analysed with Langmuir, Freundlich and Temkin isotherm models, with Lan...

A biomass agricultural waste material, olive stone (OS) was used for preparation of activated carbon (AC) by chemical activation using 50% phosphoric acid (PA5) carbonized at 800C and holding time 90 min (OSPA58).The prepared AC was used for sorption of La(III) ions from nitrate solution.The effect of various factors such as shaking time, pH, carbon dose, particle size and different temperature...

Abstract Mefenamic acid is a nonsteroidal anti-inflammatory drug (NSAID) that has analgesic,anti-infammatory and antipyretic actions. It is used to relieve mild to moderate pains. Solid-phase extraction of mefenamic acid by a polymer grafted to silica gel is reported . Poly allyl glycidyl ether/iminodiacetic acid-co-N, N-dimethylacrylamide was synthesized and grafted to silica gel and was used ...

Phosphorus sorption characteristics of some Indian representative agricultural soils belonging to four soil orders namely Vertisol, Inceptisol, Alfisol and Ultisol were investigated for adsorption behaviour of P and sorption data were fitted to Langmuir and Freundlich equations. The Langmuir constant i.e. adsorption maxima was highest for Vertisol (716.85 μg g -1 ), followed by Ultisol (633.3 μ...

This study compared the abilities of two low-cost materials: a dried activated sludge and sunflower leaves to remove cadmium from aqueous solutions. Kinetic data and equilibrium sorption isotherms were measured in batch conditions. Kinetics of cadmium sorption was time contact and initial cadmium concentration dependent. The cadmium uptake of these two low-cost materials was quantitatively eval...

poly urea-formaldehyde was synthesized simply and rapidly from urea and formaldehyde by condensation polymerization and studied for the sorption of trace acid blue from aqueous solution. the optimum ph value for sorption of the acid blue was 4. experimental results showed that the sorption capacity of poly urea-formaldehyde for acid blue was determined. the synthetic polymer can be reused for 5...

Phosphate removal to a hydrothermally modified fumed silica and pulverized oyster shell material for use in wastewater treatments were made. Sorption data modeling (pH's 3-11, P concentrations of 3, 5, 10, 15, 20, & 25 mg/L, and at an ambient temperature of 23°C) indicate that an optimal removal of P occurs at pH 11. Three kinetic models were also applied (a pseudo-first-order Lagergren kinetic...

The paper is focused on the sorption of phosphorus from aqueous solutions by crystalline and amorphous blast furnace slags. Slag sorption kinetics were measured, adsorption tests were carried out and the effect of acidification on the sorption properties of slags was studied. The kinetic measurements confirmed that the sorption of phosphorus on crystalline as well as amorphous slags can be desc...