Ni-WC composite coatings on 35CrMoV alloy surface were successfully prepared by mechanical vibration field-assisted laser cladding technology. Optical microscopy (OM) and scanning electron (SEM) used to study the microstructure of without at different frequencies; phase composition layer was studied X-ray diffraction (XRD); an energy dispersive spectrometer (EDS) for elemental plane analysis. T...

We report on fabrication of tubular optical waveguides buried in ZBLAN glass based on transverse femtosecond laser direct writing. Irradiation in ZBLAN with focused femtosecond laser pulses leads to decrease of refractive index in the modified region. Tubular optical waveguides of variable mode areas are fabricated by forming the four sides of the cladding with slit-shaped femtosecond laser pul...

A high-power 83 W cladding-pumped Tm3+-Ho3+-doped silica fiber laser is reported. Using bidirectional 793 nm diode pumping, a maximum slope efficiency of 42% was produced after a threshold launched pump power of 12 W was exceeded. The laser operated at wavelengths near 2105 nm with moderate beam quality, i.e., M2 approximately 1.5. Further power scaling of the fiber laser was limited by thermal...

Background and Aim: Bleaching can improve the color of restorative materials and resolve problems related to discoloration or color mismatch. This study evaluated the effect of in-office bleaching method in conjunction with two different laser wavelengths on color change of two types of glass-ionomer restorative materials (light-cure and self-cure). Materials and Methods: In this experimenta...

Fused silica glass is a commonly used high-performance material. However, due to the high temperature necessary for its production, manufacturing can also be challenging and costly. An attractive approach additive through laser cladding. Laser cladding of transparent fused was achieved using CO 2 -laser locally melt substrate while injecting stream fumed powder into melt-pool. By described tech...

In this paper we present briefly two possible approaches for modelling the laser cladding process. The first approach is 2D and consists in finding the shape of the molten pool given the fraction of the laser power which is available at the surface of the workpiece and given the amount of powder sticking to the molten pool. The powder reaching the workpiece is assumed to melt instantaneously at...

In this paper, a heat input closed-loop control system based on infrared image sensing for 3D laser cladding is introduced. A high frame-rate (up to 800 frames/s) camera is installed coaxially on the top of the laser-nozzle setup. Complete of the infrared images of the molten pool can be acquired with a short nozzle-substrate distance in different scanning directions, eliminating the noise from...

Ni-based alloy powders with different contents of cobalt (Co) have been deposited on a 42CrMo steel substrate surface using a fiber laser. The effects of Co content on the microstructure, composition, hardness, and wear properties of the claddings were studied by scanning electron microscopy (SEM), an electron probe microanalyzer (EPMA), X-ray diffraction (XRD), a hardness tester, and a wear te...

Remanufacturing Laser cladding Inspection Additive Manufacturing (AM) Adaptive machining Hybrid processing Repair Remanufacturing is one of the most efficient ways of recycling worn parts because it consumes only a fraction of the energy, cost, and material required for new parts. Remanufacture of engineering components typically entails serial labor intensive and operator skill sensitive proce...

Large aperture Nd:phosphate laser glass is a key optical element for an inertial confinement fusion (ICF) facility. N31, one type of neodymium doped phosphate glasses, was developed for high peak power laser facility applications in China. The composition and main properties of N31 glass are given, together with those of LHG-8, LG-770, and KGSS0180 Nd:phosphate laser glasses, from Hoya and Scho...