A simple corrected resonance light-scattering (CRLS) technique was established to correct for any distortion of the resonance light scattering (RLS) spectra resulting from molecular absorption. By using an absorption cell holder to change the propagation direction of the incident light beam of a common spectrofluorometer, the molecular absorption was directly measured through a spectrofluoromet...

We present a GPU accelerated toolbox for shaping the light propagation through multimode fibre using a spatial light modulator (SLM). The light is modulated before being coupled to the proximal end of the fibre in order to achieve arbitrary light patterns at the distal end of the fibre. First, the toolbox optimises the acquisition time of the transformation matrix of the fibre by synchronous op...

A new method for recovery the quantitative phase information of microscopic samples is presented. It is based on a spatial light modulator (SLM) and digital image processing as key elements to extract the sample's phase distribution. By displaying a set of lenses with different focal power, the SLM produces a set of defocused images of the input sample at the CCD plane. Such recorded images are...

We present an in situ beam characterization technique to analyze femtosecond optical beams in a folded version of a 2f-2f setup. This technique makes use of a two-dimensional spatial light modulator (SLM) to holographically redirect radiation between different diffraction orders. This manipulation of light between diffraction orders is carried out locally within the beam. Because SLMs can withs...

We apply terahertz (THz) time-domain spectroscopy for monitoring the curing process of three different light-curing dental composites. Exact knowledge of the sample thickness is required for a precise determination of the THz dielectric parameters, as the materials exhibit shrinkage when they are cured. We find very small but significant changes of the THz refractive index and absorption coeffi...

The present study aimed to assess the influence of curing distance on the loss of irradiance and power density of four curing light devices. The behavior in terms of power density of four different dental curing devices was analyzed (Valo, Elipar 2, Radii-Cal, and Optilux-401) using three different distances of photopolymerization (0 mm, 4 mm, and 8 mm). All devices had their power density meas...

OBJECTIVE Due to increasing of aesthetic demand, ceramic crowns are widely used in different situations. However, to obtain long-term prognosis of restorations, a good conversion of resin cement is necessary. To evaluate the degree of conversion (DC) of one light-cure and two dual-cure resin cements under a simulated clinical cementation of ceramic crowns. MATERIAL AND METHODS Prepared teeth ...

Powerful blue-light emitting dental curing lights are used in dental offices to photocure resins in the mouth. In addition, many dental personnel use magnification loupes. This study measured the effect of magnification loupes on the "blue light hazard" when the light from a dental curing light was reflected off a human tooth. Loupes with 3.5x magnification (Design for Vision, Carl Zeiss, and Q...

Purpose: To assess the degree of conversion (DC) dual-curing composite cements when cured through ceramic-veneered zirconia disks. Methods: Portions mixed cement, either G-CEM LinkForce (GC), Panavia V5 (Kuraray Noritake) or ResiCEM (Shofu), were placed on ATR crystal a Fourier Transform Infrared Spectroscope (FTIR; iS50, Thermo Scientific) and squeezed to 100-µm film thickness using microscopy...