Finite element formulations based generally on classical beam theories such as Euler-Bernoulli or Timoshenko. Sometimes, these two formulations could be problematic expressed in terms of restrictions of Euler-Bernoulli beam theory, in case of thicker beams due to non-consideration of transverse shear; phenomenon that is known as shear locking characterized the Timoshenko beam theory, in case of...

To the authors' knowledge, no published studies have examined the use of locking plates on injuries of the anterior pelvic ring. The purpose of this study was to determine whether locked plates provide enhanced stability in the treatment of pubic symphyseal disruptions. Completely unstable pelvic injuries were simulated in pelvic Sawbones (model 1301; Pacific Research Laboratories, Vashon, Wash...

Soft growing robots have received considerable attention because of their unique locomotion. However, the use a single material for manufacturing causes numerous problems, each part robot requires different characteristics. This study attempts to solve this fundamental problem from perspective, rather than integrating independent solutions. A hyperelastic is proposed building soft robot. Severa...

Paper focuses on biomechanics, specifically on locking cortical bone screws in angularly stable plates used for the treatment of bone fractures in the medical fields of traumatology and orthopaedics. During extraction of titanium-alloy implants, problems are encountered in an effort to loosen some locking bone screws from the locking holes of an angularly stable plate and the subsequent strippi...

Anisotropic material with inextensible fibers introduce constraints in the mathematical formulations. This is always the case when fibers with high stiffness in a certain direction are present and a relatively weak matrix material is supporting these fibers. In numerical solution methods like the finite element method the presence of constraints—in this case associated to a possible fiber inext...

BACKGROUND Acetabular reinforcement devices (ARDs) are frequently used as load-sharing devices to allow allograft incorporation in revision hip arthroplasty with massive acetabular bone loss. The key to a successful reconstruction is robust fixation of the device to the host acetabulum. Interlocking fixation is expected to improve the initial stability of the postoperative construct. However, a...

OBJECTIVES Locked plating constructs may be too stiff to reliably promote secondary bone healing. This study used a novel imaging technique to quantify periosteal callus formation of distal femur fractures stabilized with locking plates. It investigated the effects of cortex-to-plate distance, bridging span, and implant material on periosteal callus formation. DESIGN Retrospective cohort stud...

In Tape Locking Screw (TLS(®)) ligamentoplasty, transplant bone fixation uses polyethylene terephthalate (PET). We report two cases of aseptic arthritis following anterior cruciate ligament (ACL) reconstruction using this material. Diagnosis was founded on negative sampling and complete cure following arthroscopic lavage and synovectomy without curative antibiotherapy. This complication was als...

We report on stable dual-wavelength operation in passive and hybrid mode-locking of a 10GHz two-section InAs/InP(100) quantum dot laser diode operating at 1.5μm. The range of stable passive mode-locking, the locking range of hybrid mode-locking and detailed measurements of the phase modulation in the output pulses will be presented. Keywordsmode-locked laser diode; quantum dot; hybrid mode-lock...

BACKGROUND Axial dynamization of fractures can promote healing, and overly stiff fixation can suppress healing. A novel technology, termed active plating, provides controlled axial dynamization by the elastic suspension of locking holes within the plate. This prospective, controlled animal study evaluated the effect of active plates on fracture-healing in an established ovine osteotomy model. W...