We give an explicit construction of a function that is almost a 2-source extractor for linear entropy, it is a condenser where the output has almost full entropy. Given 2 sources with entropy δn, the output of the condenser is a distribution on m-bit strings that is ǫ-close to having min-entropy m− poly(log(1/ǫ), 1/δ), where here m is linear in n.

The condenser is one of the main components in most transmitted light compound microscopes. In this Letter, we show that such a condenser can be replaced by a programmable LED array to achieve greater imaging flexibility and functionality. Without mechanically scanning the sample or changing the microscope setup, the proposed approach can be used for dark-field imaging, bright-field imaging, mi...

In this work we present an overview of the main advances in column sequence optimization in zeotropic systems, ranging from systems using only conventional columns, each with a condenser and a reboiler, to fully thermally coupled systems with a single reboiler and a single condenser in the entire sequence. We also review the rigorous design of distillation columns, or column sequences. In all t...

This study presents thermodynamic analysis and optimization of single effect LiCl-H2O absorption cooling system. Thermodynamic models are employed in engineering equation solver to compute the optimum performance parameters. In this study, cut off temperature to operate system has been obtained at various operating temperatures. Analysis depicts that on 3.59 % rise in evaporator temperature, th...

Water-cooled chiller systems have typically been designed around entering condenser water temperatures of 85°F with a Optimization of Water Cooled Chiller – Cooling Tower Combinations The warm water leaving the chilled water coils is pumped to the evaporator of the chiller, where the unwanted heat from the building is transferred by the latent heat of vaporization of the refrigerant. The compre...

Distributed energy (DE) resources are power sources located near load centers and equipped with power electronics converters to interface with the grid, therefore it is feasible for DE to provide reactive power (along with active power) locally for dynamic voltage regulation. In this paper, a synchronous condenser and a DE source with an inverter interface are implemented in parallel in a distr...

Denis CLODIC Centre d'Energetique ·Ecole des Mines de Paris 60, boulevard Saint-Michel· F • 75272 PARIS Cedex 06 A test bench has been developed consisting in an open display-case and a refrigerating system composed mainly of four hermetic compressors, an air cross-current condenser and an evaporator. The evaporating temperature of -40°C allows to keep the temperature of the products at ·18°C f...

We describe the in-house fabrication and characterization of a condenser zone plate for a compact laser–plasma-based soft x-ray microscope operating at 2.478 nm wavelength. The fabricated condenser has a diameter of 4.53 mm and an outermost zone width of 49 nm. The pattern is generated by a small-write-field e-beam lithography system and 656 single, 100 mm wide write fields are stitched togethe...

This study constructed a parameter analysis for improving the energy performance of air-cooled water chillers by altering the angle configuration of the condenser coils. The mathematical models for energy and exergy analyses of the individual components and overall system of air-cooled water chillers are presented. This study investigated the potential enhancement of performance efficiency in a...

The objective of this paper was to study the performance of household refrigerator having both air and water-cooled condenser, with 0.06% mass fraction CuO nanoparticle-lubricant mixture and different types of compressor oils. The experiment was done using HFC134a as the refrigerant, CuO nanoparticles, Polyol-ester oil (POE) oil which is used as the conventional lubricant in the household refri...