This study investigates propagation of mode I crack in B70 pre-stressed concrete sleepers by fracture mechanics approach. A new experimental analysis is done for notched B70 pre-stressed concrete sleepers with Replica test and image analysis. A scanning electron microscope test (SEM) and an image analysis are applied for the Replica test in order to determine crack length and crack mouth openin...

An axi{symmetric problem for a penny{shaped crack bridged by bres is considered. The study is reduced to the analysis of a hy-persingular integral equation with respect to the relative crack{face separation over a circular domain occupied by crack. The special case of a large crack subjected to Mode{I loading is examined. A matched asymptotic expansions technique is used in order to estimate th...

This paper deals with the determination of the effect of varying material properties on the value of the stress intensity factors, KI and KII, for anisotropic plates containing cracks and subjected to a temperature change. Problems involving cracks and body forces, as well as thermal loads are analysed. The quadratic isoperimetric element formulation is utilized, and SIFs may be directly obtain...

The work involves develops attended by a numerical execution of the eXtend Finite Element Method premises a measurement by the fracture process cracked so many cracked plates an application will be processed for the calculation of the stress intensity factor SIF. In the first we give in statically part the distribution of stress, displacement field and strain of composite plate in two cases unc...

Mechanisms for fatigue crack closure under plane strain conditions have recently been identified at very low (near-threshold) stress intensities in terms of effects of excess corrosion deposits or fracture surface roughness in promoting premature closure of the crack. In the present paper, a geometric model is presented for crack closure induced by fracture surface roughness. This model specifi...

We continue our study of the exact solutions for steady-state cracks in ideally brittle viscoelastic lattice models by focusing on mode I in a triangular system. The issues we address include the crack velocity versus driving curve as well as the onset of additional bond-breaking, signaling the emergence of complex spatio-temporal behavior. Somewhat surprisingly, the critical velocity for this ...

In this paper, the interface crack of two non-homogenous functionally graded materials is studied. Subsequently, with employing the displacement method for fracture of mixed-mode stress intensity factors, the continuous variation of material properties are calculated. In this investigation, the displacements are derived with employing of the functional graded material programming and analysis o...

The presented work introduces a numerical parametric study on the crack propagation direction under mixed-mode conditions (mode I + II). It is conducted for the geometry of an eccentric asymmetric fourpoint bending of a single edge notched beam specimen; various levels of mode-mixity are ensured by modifications in the crack length and crack eccentricity. The direction of crack propagation is e...

in this paper the critical strain energy release rate for t300/913 carbon-epoxy laminated composites has been studied using ansys finite element software based on virtual crack closure technique ( vcct ). compact tension ( ct ) specimen has been used for numerical analyses and the geometrical dimensions have been extracted from the existing references. the results obtained from the finite eleme...

Crack propagation modeling in quasi-brittle materials such as concrete is essential for improving the reliability and load-bearing capacity assessment. Crack propagation explains many failure characteristics of concrete structures using the fracture mechanics approach. This approach could better explain the softening behavior of concrete structures. A great effort has been made in developing nu...