In this work, thermal transport in nanocrystalline materials is studied using large-scale equilibrium molecular dynamics simulation. Nanocrystalline materials with different grain sizes are studied to explore how and to what extent the size of nanograins affects the thermal conductivity and specific heat. Substantial thermal conductivity reduction is observed and the reduction is stronger for n...

We describe a two-step dealloying/compaction process to produce nanocrystalline Au. First, nanocrystalline/nanoporous Au foam was synthesized by electrochemically driven dealloying. The resulting Au foams exhibited porosities of ∼60% with pore sizes of 40 and 100 nm and a typical grain size of <50 nm. Second, the nanoporous foams were fully compacted to produce nanocrystalline monolithic Au. Th...

The tensile properties of Mg-3%Al nanocrystalline alloys were investigated at different test environment. Bulk nanocrystalline samples of these alloy was successfully prepared by mechanical alloying (MA) followed by cold compaction, sintering, and hot extrusion process. The crystal size of the consolidated milled sample was calculated by X-Ray line profile analysis. The deformation mechanism an...

Influence of microstructure on electrochemical behavior of nanocrystalline Fe88Si12 alloy has been investigated in 3.5 wt% NaCl solution. The results show that Fe88Si12 alloy with optimal corrosion resistance is composite of ordered Fe3Si and disordered Fe(Si) phases and grain size of 40 nm. Because the ordered Fe3Si structure is beneficial to form SiO2 film, which possesses good corrosion resi...

In this study, the microstructural, mechanical, adhesion, and hemocompatibility properties of nanocrystalline diamond coatings were examined. Microwave plasma chemical vapor deposition (MPCVD) was used to deposit nanocrystalline diamond coatings on silicon (100) substrates. The coating surface consisted of faceted nodules, which exhibited a relatively wide size distribution and an average size ...

The atomistic mechanisms active during plastic deformation of nanocrystalline metals are still a subject of controversy. The recently developed approach of combining automated crystal orientation mapping (ACOM) and in situ straining inside a transmission electron microscope was applied to study the deformation of nanocrystalline Pd x Au1- x thin films. This combination enables direct imaging of...

Macroscopic strain was hitherto considered a necessary corollary of deformation twinning in coarse-grained metals. Recently, twinning has been found to be a preeminent deformation mechanism in nanocrystalline face-centered-cubic (fcc) metals with medium-to-high stacking fault energies. Here we report a surprising discovery that the vast majority of deformation twins in nanocrystalline Al, Ni, a...

Nanocrystalline silicon microwires are self-heated through single, large amplitude, and microsecond voltage pulses. Scanning electron micrographs show very smooth wire surfaces after the voltage pulse compared to as-fabricated nanocrystalline texture. Voltage-pulse induced self-heating leads to significant conductance improvement, suggesting crystallization of the wires. The minimum resistivity...

The effect of coherency WC/Co phase boundaries on the fracture toughness of the nanocrystalline WC-Co cemented carbides is studied by MD simulation method. The simulation results show that the nanocrystalline WC-Co cemented carbides with coherency WC/Co phase boundaries has higher fracture toughness than that without coherency WC/Co phase boundaries. Moreover, the mechanism of why coherency WC/...

Nanocrystalline SnO2 thin films were successfully prepared using sol-gel dip coating technique. The starting precursor was used as tin chloride dihydrate (SnCl2.2H2O), ethanol and glycerin. As the prepared films were fired at 500 o C. These films were characterized using XRD, FESEM and TEM to known crystal structure, surface morphology and microstructure property. Elemental composition was stud...