Post-manufacturing thermal treatments are commonly employed in the production of hip replacements to reduce shrinkage voids which can occur in cast components. Several studies have investigated the consequences of these treatments upon the alloy microstructure and tribological properties but none have determined if there are any biological ramifications. In this study the adsorption of proteins...

Clay minerals are widespread in natural systems and have been widely used for the removal of pollutants. In this study, natural expanded vermiculite was used in adsorption tests to remove ammonium nitrogen from landfill leachate. The modification of vermiculite was carried out using NaOH and HCl, and for both modifications the best concentration was 0.1 mol/L. The results produced by XRD (X-ray...

Removal of Pb 2+ from aqueous solutions using coconut shell carbons produced by KOH activation is performed in this paper. Morphology and pore structure characteristic of coconut shell carbons are analyzed by SEM and nitrogen adsorption techniques. Effects of adsorbent concentration, agitation time and initial ion concentration on the adsorption behavior are investigated, and adsorption isother...

The adsorption capacity and selectivity of carbon dioxide and nitrogen at 298 K have been evaluated for two series of MMOFs built on metal paddle-wheel building units, including non-interpenetrated Zn(BDC)(TED)(0.5) (1), Zn(BDC-OH)(TED)(0.5) (2), Zn(BDC-NH(2))(TED)(0.5) (3), and interpenetrated Zn(BDC)(BPY)(0.5) (4), Zn(BDC)(DMBPY)(0.5) (5), Zn(NDC)(BPY)(0.5) (6) and Zn(NDC)(DMBPY)(0.5) (7) fra...

Polyaniline/cerium oxide (PANI/CeO2) composites were prepared and characterized by XRD, FT-IR, nitrogen adsorption/desorption isotherms and TEM techniques. The PANI/CeO2 composites were used for removal of Remazol Red (RB-133) from aqueous solution. The adsorption behaviour of dye was studied at different experimental conditions of solution pH and reaction temperature. The adsorption isotherm s...

We report the first synthesis of titanium nitride (TiN) nanoparticles inside the nanoscale channels of mesoporous silica SBA-15. The TiN precursor, Ti(NMe(2))(4) in toluene, was incorporated into the methyl group-modified channels of the SBA-15 powder. The functionalization of pore surfaces with methyl groups generates hydrophobic surfaces that facilitate impregnation with Ti(NMe(2))(4) and min...

An easy method to synthesize SiOx coated carbon nanotubes (SiOx-CNT) through thermal decomposition of polycarbomethylsilane adsorbed on the surface of CNTs is reported. Physical properties of SiOx-CNT samples depending on various Si contents and synthesis conditions are examined by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen isotherm, scanning electron microscope (...

Porosity in catalyst particles is essential because it enables reactants to reach the active sites and it enables products to leave the catalyst. The engineering of composite-particle catalysts through the tuning of pore-size distribution and connectivity is hampered by the inability to visualize structure and porosity at critical-length scales. Herein, it is shown that the combination of phase...

Water vapor adsorption on activated carbon cloth (ACCBO) which has been oxidized to a level of 32% oxygen exhibits a unique isotherm with uniform hysteresis of small magnitude upon desorption. In contrast the adsorption on untreated ACCBO and chemically modified ACCBO (7.8% Cl), ACCBO (16% Cl), and ACCBO (4% N), exhibits sigmoidal isotherms with hysteresis loops of varying magnitudes. The latte...

In the present study, stability and structure of single and binary mixed monolayers of an unsaturated phospholipid, DOPC, and a saturated phospholipid, DPPC-d75, on the water surface, were explored using the π-A isotherm, atomic force microscopy (AFM) and sum frequency generation (SFG) vibrational spectroscopy in various environments. Our results demonstrated that DOPC in the monolayers becomes...