نتایج جستجو برای: polyurethane polymeric sponge technique

تعداد نتایج: 648420  

Journal: :npj flexible electronics 2022

Abstract With the booming development of smart wearable devices, flexible multifunctional composites with high sensitivity and well health therapy have evoked great interest for next-generation healthcare electronics. However, weak biocompatibility, low breathability, narrow sensing range greatly hinder sensors. Herein, a porous, conductive MXene/Polydimethylsiloxane/Polydopamine/Polyurethane S...

2010
R Nirmala Ki Taek Nam R Navamathavan Soo-Jin Park Hak Yong Kim

Polyurethane nanofibers containing calcium chloride (CaCl2) were prepared via an electrospinning technique for the biomedical applications. Polyurethane nanofibers with different concentration of CaCl2 were electrospun, and their bioactivity evaluation was conducted by incubating in biomimetic simulated body fluid (SBF) solution. The morphology, structure and thermal properties of the polyureth...

Journal: :Biochemical Engineering Journal 2022

Anammox is a novel and efficient nitrogen removal technique, while the long start-up time limits its industrial application, thus carriers are always utilized to accelerate start-ups. Meanwhile, preservation of anammox bacteria key element in application. Therefore, it also quite significant evaluate effect reactivation process after preservation. Through addition polyurethane sponge upflow ana...

New forms of vanadium oxide Nanoporous were fabricated using a simple chemical synthesis method. Vanadium pentoxide (V2O5) Nanoporous were synthesized by sodium metavanadate as precursor and ethylene glycol as surfactant. The samples were characterized by high resolution transmission electron microscopy (HRTEM), field effect scanning electron microscopy (FESEM) and X-ray diffraction (XRD), Four...

Journal: :Bioresource technology 2014
Lijuan Deng Wenshan Guo Huu Hao Ngo Jian Zhang Shuang Liang Siqing Xia Zhiqiang Zhang Jianxin Li

This study compared membrane fouling in a sponge-submerged membrane bioreactor (SSMBR) and a conventional membrane bioreactor (CMBR) based on sludge properties when treating synthetic domestic wastewater. In the CMBR, soluble microbial products (SMP) in activated sludge were a major contributor for initial membrane fouling and presented higher concentration in membrane cake layer. Afterwards, m...

2000
Dechang An Zan Shi Lin Sun John M. Taboada Qingjun Zhou Xuejun Lu Ray T. Chen Suning Tang William H. Steier Larry R. Dalton

We have demonstrated a polymeric electro-optic modulator based on a 132 Y-fed directional waveguide coupler. The symmetric geometry of the 132 Y-fed directional coupler provided the modulator unique characteristics of intrinsic 3 dB operating point and two complementary output ends. A low switching voltage of 3.6 V and a high extinction ratio of 26 dB were obtained with the modulator operating ...

2010
Luiza de C. Folgueras Mauro A. Alves Mirabel C. Rezende

This paper presents the processing and characterization of electromagnetic radiation absorbing paints and sheets based on magnetic and dielectric materials dispersed in polymeric matrices. Two different paint formulations containing carbonyl iron and/or polyaniline, using polyurethane as matrix, were prepared. Silicone sheets were also produced with polyaniline conducting polymer as filler. Mea...

Journal: :Biosensors & bioelectronics 2011
Ahyeon Koh Daniel A Riccio Bin Sun Alexis W Carpenter Scott P Nichols Mark H Schoenfisch

Despite clear evidence that polymeric nitric oxide (NO) release coatings reduce the foreign body response (FBR) and may thus improve the analytical performance of in vivo continuous glucose monitoring devices when used as sensor membranes, the compatibility of the NO release chemistry with that required for enzymatic glucose sensing remains unclear. Herein, we describe the fabrication and chara...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید