This paper investigates the effect of the variation of duty ratio on the different performance parameters of the three non-isolated dc-dc converters namely buck, boost and buck-boost converter. Five important parameters dependent on the duty ratio have been identified namely output voltage, output current, effective impedance at the input, minimum inductance and minimum capacitance for continuo...

This paper presents a high-efficiency nonisolated interleaved dc–dc inductor boost converter with a common active clamp circuit. Interleaved boost converters are highly preferred as it reduces the ripple current. A boost converter is used to clamp the voltage stresses of all the switches in the interleaved converter which is caused by the leakage inductances. The leakage energies of the interle...

Robust controller designed by H∞ loop shaping is complicated and its order is much higher than that of the plant. It is not easy to implement this controller in practical engineering applications. To overcome this problem, we propose an algorithm, GA based fixed-structure H∞ loop shaping control, to design a robust controller. Genetic algorithm is used to solve the H∞ loop shaping design proble...

This paper presents an interleaved boost converter with coupled inductors for photovoltaic (PV) energy conversion. The proposed soft-switching boost converter uses an interleaved method to increase its power density and coupled-inductor technology to extend its step-up voltage ratio. To reduce switching losses of active switches, the proposed interleaved boost converter incorporates a synchrono...

In this paper direct AC to DC is converted by proposed model from low AC voltage to high DC voltage in single stage conversion. And this paper presents an efficient AC to DC power that avoids the bridge rectification and directly converts low AC input voltage to high DC output voltage. This proposed converter consists boost converter and buck-boost converter both are connected in parallel to pr...

This paper presents comparative performance between Analog and digital controller on DC/DC buck-boost converter four switch. The design of power electronic converter circuit with the use of closed loop scheme needs modeling and then simulating the converter using the modeled equations. This can easily be done with the help of state equations and MATLAB/SIMULINK as a tool for simulation of those...

Conventional boost PFC converter suffers from the high conduction loss in the input rectifier-bridge. Higher efficiency can be achieved by using the bridgeless boost topology. In this paper, digital simulation of bridgeless PFC boost rectifiers, also called dual boost PFC rectifiers, is presented. Performance comparison between the conventional PFC boost rectifier and the bridgeless PFC boost r...

Time-optimal response is an important and sometimes necessary characteristic of dynamic systems for specific applications. Power converters are widely used in different electrical systems and their dynamic response will affect the whole system. In many electrical systems like microgrids or voltage regulators which supplies sensitive loads fast dynamic response is a must. Minimum time is the fas...

Single-Stage transformerless AC/DC converter received much attention in the universal line application. Unlike the existing converters a new high step-down transformerless single-stage single-switch AC/DC converter is proposed. The topology integrates a buck-buck-boost converter with low intermediate bus and output voltage. The converter utilizes a buck converter as a PFC cell and buck-boost co...

A zero voltage switching (ZVS) dc–dc converter with high voltage gain is proposed. It consists of a ZVS boost switch cell converter stage and a ZVS half-bridge converter stage with resonant converter and all these stages are merged into a single stage. The ZVS boost converter stage provides a continuous input current and ZVS operation of the power switches. The ZVS halfbridge converter stage pr...