A novel microplasma generator based on ceramic chips has been developed and coupled with optical emission spectrometry through orthogonal detection. Stable microplasma was generated between two electrodes in the ingroove discharge chamber and the optical fiber was set in perpendicular to the gas outlet to collect emitted light. The emission signal of CN is surprisingly enhanced by reacting carb...

We describe the design, construction, and operation of a simple glow discharge unit that can be used to make surfaces such as carbon-coated electron microscopy grids and glass coverslips hydrophilic. The use of a vacuum leak detector (Tesla coil) in place of a conventional high-voltage power supply and a small plastic desiccator for the vacuum chamber make the unit very inexpensive. Owing to th...

Ion current density and electron number density profiles were measured in the very-nearfield plume of a 1.35 kW stationary plasma thruster (SPT-100) loaned from Space Systems/Loraland Fakel Enterprises. In order to take these measurements without significantly disturbing plasma flow while data were collected, a small Faraday probe and a single Langmuir probe were constructed and used with high-...

Most scroll compressor models are based on a geometrical description of the scroll wraps. Since geometry is one of the main factors affecting the efficiency of the compressor, a complete description of the geometry of scroll wraps has to be known in order to establish an accurate thermodynamic model. Most authors do not yield an analytical expression of the discharge chamber, also because their...

An experimental investigation of dust acoustic ~DA! waves in a dc glow discharge plasma is described. The glow discharge is formed between a 3 cm anode disk and the grounded walls of a 60 cm diameter vacuum chamber which is filled with nitrogen gas at a pressure of about 100 mTorr. Dust located on a tray in the chamber is attracted into the plasma where it is trapped electrostatically. The dust...

Reciprocating diaphragm micro-pumps are the most common type among indirectly–driven micro-pumps. They operate by reciprocating the diaphragm with associated check valves. This paper addresses the Hydroelastic vibration of circular elastic diaphragm interacting with the incompressible and inviscid liquid inside the cylindrical chamber with a central discharge opening. Taking into account axisym...

Among one of the main problems affecting Brazilian agriculture, we can mention transport water, since in many places it is necessary to lift and other areas. Equipment such as motor pumps being used. However, they present a high cost purchase equipment, addition using non-renewable sources. Aiming get around this fact, use hydraulic ram becomes viable alternative, low-cost equipment whose funct...

This paper presents the experimental results of comparison between leakage currents and discharge currents. The leakage currents were obtained on polluted porcelain insulator. Whereas, the discharge currents were obtained on lightly artificial polluted porcelain specimen. The conducted measurements were leakage current or discharge current and applied voltage. The insulator or specimen was in a...