W. Wu,1 J. B. Zhu2 and J. Zhao1 1Ecole Polytechnique Fédérale de Lausanne (EPFL), School of Architecture, Civil and Environmental Engineering, Laboratory of Rock Mechanics (LMR), CH-1015 Lausanne, Switzerland. E-mail: [email protected] 2 Graduate Aeronautical Laboratories and Department of Mechanical and Civil Engineering, Division of Engineering and Applied Sciences, California Institute of Techn...

Static deformation modulus is recognized as one of the most important parameters governing the behavior of rock masses. Predictive models for the mechanical properties of rock masses have been used in rock engineering because direct measurement of the properties is difficult due to time and cost constraints. In this method the deformation modulus is estimated indirectly from classification syst...

Since rock fracture is a key property for different rock engineering applications, rock fracture measurement is often carried out in classifying the rock mass. Most geo-mechanics models (e.g. finite element) are of the equivalent continuum type in which fractures are represented not individually, but by their influence on a large element of the rock mass. Elastic modulus, for example, is obtain...

static deformation modulus is recognized as one of the most important parameters governing the behavior of rock masses. predictive models for the mechanical properties of rock masses have been used in rock engineering because direct measurement of the properties is difficult due to time and cost constraints. in this method the deformation modulus is estimated indirectly from classification syst...

determination of porosity, permeability, and pore volume compressibility of reservoir rocks and those variations with effective stress changes are of great interest in petroleum engineering. this paper has studied the influence of pore types of carbonate reservoir rocks on pore volume compressibility as well as klinkenberg permeability and porosity at different stress values. in the current stu...

explosion has always been regarded as one of the most complicated engineering problems. as a result, many engineers have preferred rather simplified empirical approaches in comparison to extremely complex deterministic analyses. in this paper, however, a numerical simulation based on the combined finite/discrete element methodology is presented for analyzing the dynamic behavior of fracturing r...

Abstract This research describes a quantitative, rapid, and low-cost methodology for debris flow susceptibility evaluation at the basin scale using open-access data geodatabases. The proposed approach can aid decision makers in land management territorial planning, by first screening areas with higher susceptibility. Five environmental predisposing factors, namely, bedrock lithology, fracture n...

Understanding and estimating the rock stress state has become increasingly important as nowadays numerical models are mainly used as rock engineering design tool. The objective in determining rock stresses may, in many cases, be seen as an interactive process. The type of data needed may change, depending on at what stage an underground project is in. Further more, preliminary measurements may ...