We demonstrate that a fluidized bed of hard spheres undergoes a glass transition during defluidization. As in other glass-forming systems, the dynamics of the bed becomes heterogeneous as the transition is approached; spatial and temporal correlation scales increase rapidly. Microscopic motion persists in the glass state, but the bed can be jammed (all motion arrested) by application of a small...

Size enlargement of fine powders by wet granulation involves mixing of fine particles with a binder liquid to form larger wet granules and drying them by evaporation of the binder liquid to form larger dry granules. Identification of the time for completion of granulation process is critical as further mixing of dry granules is providing extra energy for their attrition. In a batch fluidized be...

Drying of green peas in a Fluidized Bed Dryer (FBD) with inert particle, heated by combined sources of hot air and InfraRed (IR) radiation, has been experimentally and theoretically studied. For this purpose, an experimental set up was constructed. This setup was composed of a cylindrical bed dryer containing some inert particles which are fluidized by hot air. Some infrared lamps were also pla...

Fluidized beds have been widely used in power generation and in the chemical, biochemical, and petroleum industries. The 3D simulation of commercial scale fluidized beds has been computationally impractical due to the required memory and processor speeds. However, in this study, 3D Computational Fluid Dynamics simulation of a gas-solid bubbling fluidized bed is performed to investigate the effe...

The hydrodynamics in a 152 mm ID bubbling fluidized bed filled with 500-600 μm glass beads have been simulated using the computational fluid dynamics (CFD) code Fluent 6.3, and the results are compared to experimental data obtained using pressure measurements and 3D X-ray computed tomography. The grids in a Cartesian coordinate system used in simulations are made by 2D (8×8 mm, 4×4 mm, 2×2 mm, ...

Ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. The solid particles obtained in this process of drying were semi-porous and known as the group D of Geldart classification. The variations of moisture content with resident time, the effects of bed height on the pressure dro...

This paper presents an attempt to optimize fluidized bed drying of wet and adhesive particles (with an initial diameter of about 580 mm) with the use of stirring, and discusses the influence of stirring on the total drying time. The goal was to demonstrate the positive effect of stirring a fluidized bed to the drying time, to find the optimal parameters (stirrer design, speed, and size). Experi...

Expanded Bed Adsorption enables the protein recovery directly from cultivations of microorganisms or cells and preparations of disrupted cells, without the need for prior removal of suspended solids. The performance ofan expanded bed is comparable to a packed bed owing to reduced mixing of the adsorbent particles, clogging/plugging of solid particles in the column, while fluidized bed requires ...

drying of green peas in a fluidized bed dryer (fbd) with inert particle, heated by combined sources of hot air and infrared (ir) radiation, has been experimentally and theoretically studied. for this purpose, an experimental set up was constructed. this setup was composed of a cylindrical bed dryer containing some inert particles which are fluidized by hot air. some infrared lamps were also pla...