Prevention and removal of fouling is often the most energy intensive process in Membrane Bioreactors (MBRs), responsible for 40% to 50% of the total specific energy consumed in submerged MBRs. In the past decade, methods were developed to quantify and qualify fouling, aiming to support optimization in MBR operation. Therefore, there is a need for an evaluation of the lessons learned and how to ...

The effect of the glass industry on heavy metal characterization was assessed in the sludge/sediments of 5 discharge pits (sites) for effluents of functional glass factories and/or finishing workshops in the study area. A comprehensive profile of Zn, Mn, Co, Cd, Pb, Cr, Ni,Cu and As levels in industrial sludge was obtained. Correlation coefficients for metal pairs indicate varying levels (posit...

Alternate cycling of sludge in aerobic, anoxic, and anaerobic regimes is a promising strategy that can reduce the sludge yield of conventional activated sludge (CAS) by up to 50% with potentially lower capital and operating cost than physical- and/or chemical-based sludge minimisation techniques. The mechanisms responsible for reducing sludge yield include alterations to cellular metabolism and...

The paper presents the procedure of examination and characterization sludge from wastewatertreatment. This includes: sampling, identification with categorization waste, dependingon degree danger, subject waste as hazardous determination theconcentration substances, physico-chemical toxicological characteristics andeffects on human health, impact environment others procedures in accordance witht...

The literature on reduction of excess sludge production by ozonation is summarized. Two sequencing batch reactor experiments where sludge is ozonated for this purpose are performed. The purpose of these is to evaluate the prospects of using ozonation to reduce excess sludge production in two different kinds of sludge. Urban sewage sludge is used in the first, and paper mill sludge in the second...

The main objective of this study was to investigate the rheology of mixed primary and secondary sludge and its dependency on solid content and temperature. Results of this study showed that the temperature and solid concentration are critical parameters affecting the mixed sludge rheology. It was found that the yield stress increases with an increase in the sludge solid content and decreases wi...