Hydraulic fracturing is a phenomenon in which cracks propagate through the porous medium due to high pore fluid pressure. Hydraulic fracturing appears in different engineering disciplines either as a destructive phenomenon or as a useful technique. Modeling of this phenomenon in isothermal condition requires analysis of soil deformation, crack and pore fluid pressure interactions. In this paper...

This paper at first reports an experimental work to test the thermal conductivity of formulated sandy soil specimens of different porosities and water contents. Both needle probe and hot-plate methods were conducted and compared. It has been confirmed that the needle probe method has a better accuracy for the measurement of unsaturated soil thermal conductivity, and that the pore size distribut...

Fresh water source scarcity in arid and semiarid area is limitation factor for saline-sodic soil reclamation. The reusing of agricultural drainage and industrial wastewater are preferred strategies for combating with this concern. The objective of current study was evaluation in application of industrial sugar manufacture wastewater due to high soluble organic compounds in saline-sodic and sodi...

A solution is developed for the evolution of buildup, steady, and postarrest dissipative pore-fluid pressure fields that develop around a finite-radius conical penetrometer advanced in a saturated linearly elastic porous medium. The analog with cone penetrometer testing is direct and is used to enable continuous distributions of permeability and diffusivity to be determined with depth. This ana...

in this research the mechanical behavior of an expansive soil (with different pore fluid) was investigated under the constant and variable temperature through experimental tests. the soil samples with different pore fluid (distilled water, nacl and cacl2 with concentration of 250 gr/lit) were prepared by static compaction method. experimental testes were conducted in two modified odometer under...

17 To assess the risks that contaminated soils pose to the environment properly a greater 18 understanding of how soil biota influence the mobility of metal(loid)s in soils is 19 required. Lumbricus terrestris L. were incubated in three soils contaminated with As, 20 Cu, Pb and Zn. The concentration and speciation of metal(loid)s in pore waters and the 21 mobility and partitioning in casts were...

The use of acoustics to determine the pore properties of soils, such as porosity, permeability, and tortuosity, is well established. A theoretical surface impedance and complex bulk wavenumber was developed by K. Attenborough for porous media that incorporated the soil pore properties as parameters [J. Acoust. Soc. Am. 73, 785-799 (1983)]. Acoustic level difference measurements were used as a n...

A soil core, obtained from a contaminated field site, contaminated with a mixture of volatile and semivolatile organic compounds (VOC and SVOC) was subjected to air and steam flushing. Removal rates of volatile and semivolatile organic compounds were monitored during flushing. Air flushing removed a significant portion of the VOC present in the soil, but a significant decline in removal rate oc...

Generally seepage analysis and stress–strain analysis are conducted separately in the analysis of dams with varied water levels, which neglects the impact of soil deformation on seepage. The impact, however, is significant when the water level varies greatly. In this study, a simplified approach for consolidation analysis of unsaturated soil is used to conduct numerical simulations of water-fil...

for all properties whereas tillage practices contributed the most to the variation of infiltrability. Tillage causes soil fragmentation thereby increasing the proportion Quantifying the temporal dynamics of the PSD may of interaggregate (structural) pore space. The resulting tilled layer have important applications, but to do so in a determintends to be structurally unstable as manifested by a ...