In the present study, the high viscosity of the jatropha curcas oil was decreased by preheating. The effect of fuel inlet temperature on performance of diesel engine is evaluated. A single cylinder, four stroke, constant speed, air cooled, direct injection diesel engine developing a power output of 3.7 kW at 1500 rev/min typically used in agricultural sector was tested using neat jatropha oil a...

Citation: Barnhill WC, Gao H, Kheireddin B, Papke BL, Luo H, West BH and Qu J (2015) Tribological bench and engine dynamometer tests of a low viscosity SAE 0W-16 engine oil using a combination of ionic liquid and ZDDP as anti-wear additives. Front. Mech. Eng. 1:12. doi: 10.3389/fmech.2015.00012 Tribological bench and engine dynamometer tests of a low viscosity SAE 0W-16 engine oil using a combi...

A potential degrader of paraffinic and aromatic hydrocarbons was isolated from oil-contaminated soil from steel plant effluent area in Burnpur, India. The strain was investigated for degradation of waste lubricants (waste engine oil and waste transformer oil) that often contain EPA (Environmental Protection Agency, USA) classified priority pollutants and was identified as Ochrobactrum sp. C1 by...

The piston ring assembly is one of the key parts of internal combustion engine. Its performance decides engine power loss to over come friction force and determines the performance of the whole engine. As per the literature review it is reported 40 to 50 % of the total mechanical friction losses in piston ring cylinder wall interface. The present work mainly focused on study of basic tribologic...

nowdays, production of high quality engine oils is one of the worries of our country’s engine oil industry. in this study, the behavior of four commercial polymers used in nation motor oil industry in obtaining the best viscosity index improver was investigated. in this regard, viscometric behavior, shear stability and polymers’ performance for engine cranking were compared at low temperature. ...

Nowadays, due to the increasing power of diesel engines, especially heavy duty diesel engines, and increasing gas pressure inside the combustion chamber, the forces acting on the engine bearings have dramatically raised. On the other hand, becaus eof the competition in the market, it is necessary to increase the engine bearing life and reduce its failure as much as possible. The engine bearings...