Mono dispersed nano SiC particles with spherical morphology were synthesized in this project by hydrolysis and condensation mechanism during sol gel processing. pH, temperature and precursor’s ratio considered as the main parameters which could influence particles size. According to DLS test results, the smallest size of particles in the sol (<5nm) was obtained at pH<4. It can be observed from ...

OBJECTIVES The objective of this work was to spray dry p-aminosalicylic acid (PAS) and its ammonium salt and to investigate the impact of the pore-forming agent, ammonium carbonate (AC), on the morphological, aerodynamic and physicochemical properties of the resulting powders. METHODS Microparticles were prepared by spray drying from ethanol/water solvent systems. Their solid-state properties...

The electrochemical characteristics of a mixture of Pt-black and WC powders and its catalytic activity for methanol and formic acid oxidation were investigated in acid solution. XRD and AFM measurements revealed that the WC powder employed for the investigation was a single-phase material consisting of crystallites/spherical particles of average size of about 50 nm, which were agglomerated into...

Porous microspherical Li4Ti5O12 aggregates (LTO-PSA) can be successfully prepared by using porous spherical TiO2 as a titanium source and lithium acetate as a lithium source followed by calcinations. The synthesized LTO-PSA possess outstanding morphology, with nanosized, porous, and spherical distributions, that allow good electrochemical performances, including high reversible capacity, good c...

A novel porous metal fiber/powder sintered composite sheet (PMFPSCS) is developed by sintering a mixture of a porous metal fiber sintered sheet (PMFSS) and copper powders with particles of a spherical shape. The characteristics of the PMFPSCS including its microstructure, sintering density and porosity are investigated. A uniaxial tensile test is carried out to study the tensile behaviors of th...

ZnO nano-particles have been synthesized by simple chemical route using a starting solution consisting of zinc acetate and citric acid as a surfactant agent. The structural properties of the prepared ZnO nano-particles annealed at different temperatures have been characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses. The XRD patterns show ZnO-wurtize phase...

Metal powders are a fundamental starting point for fabricating many types of nuclear targets. Elemental powder properties can differ drastically between batches, even when using the same method. Therefore, variation in morphology and size metal cause variable quality produce inconsistent results with what otherwise proven target manufacturing techniques. Additive has additional requirements hig...

Innovative nanostructured materials offer the possibility of enhancing tribological performance traditional like graphite and molybdenum disulfide (MoS2). In this study, scratch resistance two different copper powders, dendritic spherical, their composites with MoS2, nanometric graphene nanoplatelets was investigated. Metal powder metallurgy employed to produce composite 5 wt% 10 each solid lub...