This paper presents modeling of the complex permeability spectra, fabrication and a wide frequency range characterization of a toroidal LTCC ferrite sample. A commercial ferrite tape ESL 40012 is used, and standard LTCC (Low Temperature Co-fired Ceramic) processing has been applied to the sample fabrication. The characterization was performed using a short coaxial sample holder and a vector net...

A ferrite-dielectric metamaterial composed of dielectric and ferrite cuboids has been investigated by experiments and simulations. By interacting with the electromagnetic wave, the Mie resonance can take place in the dielectric cuboids and the ferromagnetic precession will appear in the ferrite cuboids. The magnetic field distributions show the electric Mie resonance of the dielectric cuboids c...

The microstructure obtained as the weld cools from the liquid phase to ambient temperature is called the as–deposited or primary microstructure. Its major components include allotriomorphic ferrite, Widmanstätten ferrite, and acicular ferrite (Fig. 1). There may also be some martensite, retained austenite or degenerate pearlite. These latter phases occur in very small fractions, and are known b...

Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use. The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters.

Nanocrystalline ~NC! ferrite powders have been synthesized using a 50 kW–3 MHz rf thermal plasma torch for high-frequency soft magnet applications. A mixed powder of Ni and Fe (Ni:Fe 51:2), a NiFe permalloy powder with additional Fe powder (Ni:Fe51:2), and a NiFe permalloy powder (Ni:Fe51:1) were used as precursors for synthesis. Airflow into the reactor chamber was the source of oxygen for oxi...

A ferrite loaded accelerating cavity with a frequency sweep of 18 to 40MHz is studied for a possible upgrade of the CERN accelerator complex. The resonance frequency of a ferrite loaded cavity shifts by applying an external magnetic bias field to the ferrite material by means of changing the relative permeability. We present the electromagnetic design of such a cavity with a special emphasis on...

A two-dimensional diffusion based model is developed to describe transformation of austenite into ferrite and pearlite under continuous cooling conditions. The nucleation of ferrite is assumed to occur over grain boundaries and the nucleation of pearlite is assumed to be taking place all over the grain and at growing ferrite–austenite interfaces, when the composition and temperature conditions ...