A series of experiments were designed to utilize the Taguchi method for investigating the effects of important parameters on the synthesis of NaX zeolite and to find the best conditions of synthesis. An L9 orthogonal design of Taguchi approach was applied to design experiments consisting of 9 trails. The effect of molar composition, including SiO2/Al2O3 and Na2O/Al2O3 ratios, and the crystalliz...

Au(III); Tris(hydroxymethyl)aminomethane; Modified activated carbon; Adsorption; Batch method Abstract In the current study, a sensitive and simple method for selective separation of gold, Au(III), from water samples prior to its determination by inductively coupled plasma-optical emission spectrometry (ICP-OES), was investigated. The method utilized activated carbon modified with tris(hydroxym...

A molecularly imprinted silica gel sorbent for selective removal of 2-Hydroxybenzoic acid (2-HA) was prepared by a surface imprinting technique with a sol-gel process. The 2-HA molecularly imprinted silica gel (2-HA-MISG) sorbent was evaluated by various parameters, including the influence of pH, static, kinetic adsorption and selectivity experiments. The optimum adsorption capacity to the 2-HA...

Dialysis is the single most important therapy for chronic kidney disease. However, protein adsorption onto hemodialysis membranes promotes clot formation. The aim of the present study was to develop a surface-modified membrane which suppresses protein adsorption. Using plasma polymerization, hydrophilic N-vinyl pyrrolidone (VP) and acryloyl morpholine (ACMO) were polymerized on hydrophobic poly...

Abm'aet--The salient features that determine the possible use of a water vapour-zeolite 13X system as a method of energy storage were investigated. Cycling studies over two months revealed no decrease in water capacity nor any structural deterioration. The rate at which water could be desorbed in a static situation was determined at various temperatures from 110 to 250°C. The adsorption isother...

HMCM-22 with a Si:Al molar ratio of 15:1 has been shown to effectively catalyze the synthesis of acetals with 100% selectivity by the reaction of aldehydes with methanol under reflux conditions. Platelet HMCM-22 particles were prepared by the static strategy and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), BET tech...

This study selected solid wastes, such as rice husk ash (RHA), inactive Saccharomyces cerevisiae powder (ISP), and rice husk (RH), as the potential adsorbents for the removal of Fe(II) and Mn(II) in aqueous solution. The structural characteristics, functional groups, and elemental compositions were determined by scanning electron microscope (SEM) and Fourier translation infrared spectrum (FT-IR...

A numerical model for the adsorption kinetics of proteins on the walls of a microchannel has been developed using the finite element method (FEM) to address the coupling with diffusion phenomena in the restricted microchannel volume. Time evolutions of the concentration of one species are given, both in solution and on the microchannel walls. The model illustrates the adsorption limitation some...

A monolithic carbon aerogel with a specific pore texture was used as benzene adsorbent. Adsorption was carried out under static conditions at 25 C and at saturation, an adsorption capacity as high as 0.77 cm.g or 837 mg.g was obtained. This work is devoted to the application of carbon aerogels for the removal of hydroquinone, catechol and resorcinol from aqueous solutions. These materials were ...

We present static and dynamical properties of linear vortices in 4He droplets obtained from density functional calculations. By comparing the adsorption properties of different atomic impurities embedded in pure droplets and in droplets where a quantized vortex has been created, we suggest that Ca atoms should be the dopant of choice to detect vortices by means of spectroscopic experiments.