This paper presents parameter identification technique to quantify the faults in motor condition monitoring. Genetic Algorithm (GA) has been used as a key technique to estimate the motor parameters. The zero-sequence voltage equation for the stator has been used as a model to estimate motor stator parameters – the stator resistance and the stator leakage inductance. The comparison of the parame...

Brushless dc motors are widely used in many industrial applications due to their high efficiency, high power density and ease of control. In this paper, sensorless direct torque control (DTC) of bldc motor is implemented using fuzzy logic. In actual DTC both torque and stator flux linkage is controlled. In the proposed system, the control of stator flux linkage is avoided because every commutat...

Among the different geometrical parameters to be chosen during design of axial flux permanent magnet synchronous machines, the width of the stator slot openings near the air gap is an important parameter: it has a major influence on the power loss in the stator core and in the permanent magnets on the two rotors of the studied type of axial flux machines. Moreover, the stator slot openings para...

This study experimentally and numerically investigates motor cooling performance. The motor consists of a centrifugal fan, two axial fans, a shaft, a stator, a rotor and a heat exchanger with 637 cooling tubes. The pressure rise-flow rate (P-Q) performance curves of the cooling fans at 1800 rpm are tested using a test apparatus complying with the Chinese National Standard (CNS) 2726. Compared w...

This paper deals with detection and diagnosis of Stator Inter turn fault of three phase Induction motor. The proposed method is based on the stator current Clarke vector pattern. Three phase stator currents are used to construct Clarke vector pattern in order to distinguish the “healthy” and “faulty” condition of induction motor. The covered area for each pattern is calculated and the per unit ...

The paper deals with the modelling of the synchronous motor with exciting and damper windings and its vector control system based on the stator-field orientation and working with capacitive, i.e. leading stator current at imposed power factor with controlled angular speed and controlled stator flux. There are presented simulation results for starting and speed reversing and also aspects regardi...

formance is analyzed for flux vector and indirect field oriented controllers. A new technique-the back electromagnetic force (BEMF) detector-for reducing the adverse effects of stator resistance on field oriented control is presented and evaluated through simulation and experimental results. The BEMF detector is shown to reduce the impact of the stator resistance and provides a stator resistanc...

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

In this paper we propose a new control scheme for the doubly–fed induction machine (DFIM) that offers significant advantages, and is considerably simpler, than the classical vector control method. In contrast with the latter, where the DFIM is represented in a stator flux–oriented frame, we propose here a model with orientation of the stator voltage. This allows for an easy decomposition of the...

This paper presents the parameters of permanent magnet synchronous motor i.e. speed (r), stator resistance (RS), q-axis inductance (Lq), and torque (Ts) is to be estimated by using Model Reference adaptive System(MRAS). To improve the performance of speed sensor less permanent magnet synchronous motor drives, especially at low speeds by identifying stator resistance together with speed. Severa...