In the marine steam power plant, the main boiler has the small size and the little heat capacity. However, marine ship requires high maneuverability, when it is running, the loads varied frequently, and the varying range is big, and this will cause the boiler security problem, such as over-pressure or under-voltage. The marine steam power plant boilerturbine coordinated control strategy is to s...

Single-shaft gas turbine and its cycles are sensitive to frequency drops and, therefore, sudden change loads or large frequency dips might affect their stability. This phenomenon is related to the reduction of the air mass flow passing through the machine during the frequency dips, which might lead to an interaction between governor and temperature control loop. In this paper, the performance o...

This paper deals with the application of steam to enhance the recovery from petroleum reservoirs. We formulate a mathematical and numerical model that simulates coinjection of volatile oil with steam into a porous rock in a one-dimensional setting. We utilize the mathematical theory of conservation laws to validate the numerical simulations. This combined numerical and analytical approach revea...

The temperature of exhaust gases from simple cycle gas turbine generation sets (GENSETs) is usually very high (around 500 C), and a heat recovery steam generator (HRSG) is often used to recover the energy from the exhaust gases and generate steam. The generated steams can be either used for many useful processes (heating, drying, separation etc.) or used back in the power generation system for ...

In the heavy-frame advanced turbine systems, steam is used as a coolant for turbine blade cooling. The concept of injecting mist into the impinging jets of steam was experimentally proved as an effective way of significantly enhancing the cooling effectiveness in the laboratory under low pressure and temperature conditions. However, whether mist/steam cooling is applicable under actual gas turb...

Conversion of water into steam is the primary function of a utility boiler. The steam pressure is used to turn a steam turbine thus, generating electricity. Within the boiler drum there exists a steam/water interface. Boiler steam drum water level is one of the important parameters of power plant that must be measured and controlled. For safe and efficient boiler operation, a constant level of ...

Introduction Hydrogen as a fuel has recently been an important issue due to developments in fuel cell technology. Hydrogen production from sustainable sources, e.g. biomass, is gaining attention for a CO2 neutral energy supply. Recent developments in flash pyrolysis technologies make it possible to convert lignocellulosic biomass efficiently to a bio-oil, which is easier for handling and transp...

The use of concentrated solar thermal energy for the production of electricity has been achieved commercially with the generation of steam in trough or tower concentrating systems. More recently, solar power stations such as the AndaSol 1 have also included 1,010 MW·h of heat storage, enough to run the turbine for about 7.5 hours at full-load. The thermal storage in the AnderSol 1 solar power s...

Steam turbines consist essentially of a casing to which stationary blades are fixed on the inside and a rotor carrying moving blades on the periphery. The rotor is fitted inside the casing with the rows of moving blades penetrating between the rows of fixed blades. Thus steam flowing through the turbine passes alternately through fixed and moving blades with the fixed blades directing the steam...