Corrosion of steel reinforcement related to the intrusion of chloride ion is still the main threats to the durability of concrete structure, especially in marine environment. For the purpose of delaying the Cl− concentration at the surface of steel reinforcement reaching the critical value leading to initial corrosion, the permeability of concrete is usually improved by optimizing the concrete ...

Low-pH cements are designed to be used in underground repositories for high level waste. When they are based on Ordinary Portland Cements (OPC), high mineral admixture contents must be used which significantly modify their microstructure properties and performance. This paper evaluates the microstructure evolution of low-pH cement pastes based on OPC plus silica fume and/or fly ashes, using Mid...

This study investigates the impact of accelerated aging conditions on the long-term flexural behavior and ductility of reinforced concrete (RC) members with glass fiber-reinforced polymer (GFRP) bars (RC-GFRP specimen) and steel bars (RC-steel specimen). A total of thirty six specimens were designed with different amounts of reinforcement with three types of reinforcing bars (i.e., helically wr...

There is a growing need for the rehabilitation, repair, and upgrading of concrete structures such as bridges and buildings. The repair or rehabilitation of reinforced concrete structures often offers a lower cost alternative to rebuilding, and it is traditionally achieved by bonding steel plates to the tensile face of a reinforced concrete member. The shear strength can be enhanced with plates ...

535] A new and unique building vibration isolation pad has been developed utilizing alternating layers of elastomer and carbon fiber mesh. The carbon mesh reinforcement provides several distinct advantages over traditional steel plate reinforcement. Lower natural frequencies and/or smaller operating heights can be obtained for a given load. In addition, the carbon mesh forms both chemical and m...

The corrosion of reinforcement is one of the major causes of deterioration of reinforced concrete (RC) structures, considerably affecting their durability and reliability. The rate of reinforcement corrosion is governed by, among other factors, the presence of chlorides on the surface of the steel. The assessment of such deteriorating effects necessitates the development of relevant models and ...

Corrosion of steel reinforcement in concrete is generally considered as an electrochemical process which reduces the service life of a structure exposed to chloride ions attack. Therefore, laboratory experiments were performed in order to ascertain the effectiveness and sustainability of ternary inhibitors (calcium nitrite, ethanolamine and eco-friendly green Bambusa Arundinacea) in protecting ...

Resumo This research investigates reinforced concrete plates and shells with skew reinforcement whose directions are not aligned with the principal internal forces. Two normal forces, one tangential force, two bending moments, and one twisting moment are defined in the plane of the element. The analysis includes two shear forces in the transverse direction. The membrane and flexural forces are ...

The present study addresses optimal design of reinforced concrete (RC) columns based on equivalent equations considering deformability regulations of ACI318-14 under axial force and uniaxial bending moment. This study contrary to common approaches working with trial and error approach in design, at first presents an exact solution for intensity of longitudinal reinforcement in column section by...

Aims and Objective Denture fractures are a common problem in clinical practice. Despite the use of different reinforcement materials (metal wires, metal plates, and various types of fibers) for denture repairs, recurrent fractures are still common. The purpose of this study was to compare the maximum flexural loads of the heat-polymerized denture base resin when repaired with autopolymerizing r...