Cd(II) and Pb(II) ions removal using adsorbents prepared from sub-bituminous coal, lignite, and a blend of coal and Irvingia gabonensis seed shells was investigated. Fourier transform infrared, scanning electron microscope and X-ray fluorescence analyses implicated hydroxyl, carbonyl, Al2O3, and SiO2 as being responsible for attaching the metal ions on the porous adsorbents. The optimum adsorpt...

Analyses of samples of the raw materials locally available for use in the Eaton (Hopewell) Furnace indicate that the iron ore and bituminous coal were of good smelting quality while the limestone (flux) was not. The limestone had a much higher then desirable silica content and a low calcium content. The limestone was insufficient to the task of removing impurities introduced through the fuel co...

The effect of hydrothermal carbonization on the properties of cellulose present in lignocellulosic biomass was investigated for converting it into a renewable energy resource with high energy recovery efficiency. The biochar obtained from cellulose subjected to hydrothermal carbonization showed a significant increase in its carbon content and a calorific value. 13C NMR spectroscopy showed that ...

The arsenic concentrations in 297 coal samples were collected from the main coal-mines of 26 provinces in China were determined by molybdenum blue coloration method. These samples were collected from coals that vary widely in coal rank and coal-forming periods from the five main coal-bearing regions in China. Arsenic content in Chinese coals range between 0.24 to 71 mg/kg. The mean of the conce...

Batch tests indicated that arsenic (As) leaching is significantly affected by the calcium concentration in fly ash in the alkaline pH range. Arsenic leaching from low calcium fly ash from eastern bituminous coal increased with increase of pH in the alkaline pH range (pH 7 – 12). Fly ash from eastern bituminous coal with a slightly higher calcium content exhibited an arsenic leaching peak at pH ...

This work describes the use of intermediate pyrolysis system to produce liquid, gaseous and solid fuels from pelletised wood and barley straw feedstock. Experiments were conducted in a pilot-scale system and all products were collected and analysed. The liquid products were separated into an aqueous phase and an organic phase (pyrolysis oil) under gravity. The oil yields were 34.1 wt.% and 12.0...

the reduction of fe2o3 powder at the top layer by the volatiles from high volatile (hv) bituminous coalat the bottom layer of a multilayer powder geometry including a separating alumina layer was studied.the simultaneous effects of the alumina layer thickness, time, temperature and the weight of coal onthe amount of reduction and coal devolatilization were studied by implementing a rotatable ce...

Unmineable coal is an important resource because of its potential to produce coalbed methane (CBM). CBM has grown to supply approximately 10% of US natural gas production and is becoming important worldwide as an energy source [1]. Furthermore, when CO2 is injected, it has the potential to enhance the amount of methane produced (ECBM) and to geologically sequestrate CO2 as an adsorbed phase. Th...

Gasification kinetic analysis of three Shenhua bituminous coal samples with various particle size ranges were carried out at different temperatures (1000, 950, and 900°C) for 30 min using the gasifying agent CO2 flow rate 40 ml min−1. The average sizes sample A, B, C 43.4, 168, 293 μm, respectively. Experimental results indicated that there differences among weight loss curves sizes. Furthermor...