A Lattice Boltzmann method is applied to demonstrate the comparison results of simulating natural convection in an open end cavity using different hydrodynamic and thermal boundary conditions. The Prandtl number in the present simulation is 0.71, Rayleigh numbers are 104,105 and 106 and viscosities are selected 0.02 and 0.05. On-Grid bounce-back method with first-order accuracy and non-slip met...

Detailed simulation of the thermal stresses of the reactor pressure vessel (RPV) wall in case of pressurized thermal shock (PTS) requires the simulation of the thermal mixing of cold high-pressure safety injection (HPI) water injected to the cold leg and flowing further to the downcomer. The simulation of the complex mixing phenomena including e.g. stratification in the cold leg and buoyancy dr...

The present paper describes the designing of a thermally and economically optimum mechanical draft counter-flow wet cooling tower. The design model allows the use of a variety of packing materials in the cooling tower toward optimizing heat transfer. Once the optimum packing type is chosen, a compact cooling tower with low fan power consumption is modelled within the known design variables....

in this study, the effects of linear and rotational speed of the friction stir welding tool was investigated on the heat generation and distribution at surface and inside of workpiece, material flow and geometry of the welding area of poly methyl methacrylate (pmma) workpiece. the commercial cfd fluent 6.4 software was used to simulation of the process with computational fluid dynamic technique...

KNO3 was used as the phase change material (PCM), but its thermal conductivity is too low to transfer heat between the PCM and conduction oil efficiently. In this thesis, on the basis of the previous studies (Yong Li, 2015), the solar power generation efficiency is enhanced with high temperature interval (280°C—400°C), and the new composite which are composed by the SiC honeycomb (SCH) frame an...

in this work a numerical study of thermal and fluid dynamics behavior of natural air convection in a square cavity in a laminar flow is presented, by finite volume method. the square cavity has two walls heated with different temperatures and two isolated walls. the numerical simulation is made up of several rayleigh numbers to . flow and isotherm lines are presented and analyzed. the numerical...

The design process of a superconducting current limiter (SFCL) requires simulation and definition of its electrical, magnetic and thermal properties in form of equivalent circuits and mathematical models. However, any change in SFCL parameters: dimension, resistance, and operating temperature can affect the limiting mode, quench time, and restore time. In this paper, following the simulation of...

The aim of this study is to perform a simulation study of the thermal and mechanical effects of a flat rectangular (3 × 10 mm), MRI compatible transducer operating at 5 MHz for the purpose of destroying atherosclerotic plaque. The simulation study focuses on measuring the plaque destruction (due to the thermal of mechanical mode of ultrasound) as a function of power, time, frequency, duty facto...