Experimental studies are presented in this paper on the stability of structural steel props. Three full-scale prop specimens with various geometric properties were constructed and tested statically and elastically in the lab, in order to obtain the elastic strength of the props. The total unsupported length is 6 m for the three props. The outer and inner diameters are 150 mm and 140 mm, 138 mm ...

Thin shell torispherical pressure vessel heads are known to exhibit complex elasticplastic deformation and buckling behaviour under static pressure. In pressure vessel Design by Analysis, the designer is required to assess both of these behaviour modes when specifying the allowable static load. The EN and ASME Boiler and Pressure Vessel Codes permit the use of inelastic analysis in design by an...

A continuum mechanics theory is established for the in-surface buckling of one-dimensional nanomaterials on compliant substrates, such as silicon nanowires on elastomeric substrates observed in experiments. Simple analytical expressions are obtained for the buckling wavelength, amplitude and critical buckling strain in terms of the bending and tension stiffness of the nanomaterial and the subst...

in this research, the buckling and bending behaviour of smart nanocomposite plate reinforced by single- walled carbon nanotubes (swcnts) under electro-magneto-mechanical loadings is studied. the extended mixture rule approach is used to determine the elastic properties of nanocomposite plate. equilibrium equations of smart nanocomposite plate are derived using the hamilton’s principle based on ...

This paper studies mechanical buckling of functionally graded beams subjected to axial compressive load that is simply supported at both ends lies on a continuous elastic foundation. The displacement field of beam is assumed based on EngesserTimoshenko beam theory. Applying the Hamilton's principle, the equilibrium equation is established. The influences of dimensionless geometrical parameter, ...

We present a study on swelling-induced circumferential buckling of tubular shaped gels. Inhomogeneous stress develops as the gel swells under mechanical constraints, which gives rise to spontaneous buckling instability without an external force. Full control over the postbuckling pattern is experimentally demonstrated. A simple analytical model is developed using elastic energy to predict stabi...

Compressively-stressed elastic films on finite-thickness viscous substrates can undergo a buckling instability that relieves stresses but destroys the planarity of the film. A linear-stability analysis is performed to determine the onset and maximally unstable mode of this buckling instability as a function of misfit strain, viscous layer thickness, and viscosity. We find that the onset of the ...

Individual multiwalled carbon nanotubes with a range of aspect ratios are subjected to cyclic axial compression to large strains using atomic force microscopy. Distinct elastic buckling and post-buckling phenomena are observed reproducibly and are ascribed to Euler, asymmetric shell buckling (i.e., kinking), and symmetric shell buckling. These show agreement with continuum theories that range f...

This paper presents the elastic buckling of homogeneous beams with a pair of piezoelectric layers surface bonded on both sides of the beams. The displacement field of beam is assumed based on the Engesser-Timoshenko beam theory. Applying the Hamilton's principle, the equilibrium equation is established. The influences of applied voltage, dimensionless geometrical parameter and piezoelectric thi...

We have demonstrated compression stress induced mechanical deformation of microtubules (MTs) on a two-dimensional elastic medium and investigated the role of compression strain, strain rate, and a MT-associated protein in the deformation of MTs. We show that MTs, supported on a two-dimensional substrate by a MT-associated protein kinesin, undergo buckling when they are subjected to compression ...